The Shaughnessy Report: Solving the Data Package Puzzle
Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Calling All Designers: The Latest Design Technology and AI
March 20, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Advanced design technology and AI were in the spotlight at the annual Design Town Hall, held March 19 during IPC APEX EXPO 2025. Speakers included IPC’s Peter Tranitz, Matt Kelly, and Devan Iyer, as well as a panel on the use of AI in PCB design moderated by Susan Kayesar of Siemens.
After an introduction by Peter, Matt provided an update on IPC’s recent design efforts, and Devan discussed some of the challenges and solutions in chip-package PCB co-design. Peter also spoke about the path forward for the IPC Design Leadership Council, which meets regularly to discuss the issues facing PCB designers and design engineers.
The AI panel was focused on the future, but Susan opened the proceedings with a quote from the opening scene of the dystopic 1936 Charlie Chaplin movie Modern Times: “A story of industry, of individual enterprise—humanity crusading in the pursuit of happiness.” I doubt AI design tools will ever take over the world, but many of us still think of Skynet when we hear the term AI, don’t we?
Seated on the AI panel were (L-R)bDirk Stoop, founder of the EDA software company Flux; Savita Ganjigatti of IPC India; Steve Watt of Zuken; and IPC design instructor Kris Moyer. It was a pretty lively discussion. The panel discussed whether AI in design tools would cause designers to abandon their drive to create artistic layouts and the risks vs. rewards of using AI. What are the limits to AI? How much of the designer’s job could be done with AI? Will AI ever render designers obsolete? (Probably not.) Everyone in the audience raised their hands when asked if they’d ever used AI.
Technical Editor Kelly Dack said the ongoing AI conversation reminds him of how the industry first looked at the cloud 10 years ago. “I’d ask 20 people on the show floor at APEX what they thought about the cloud,” Kelly said. “I’d get 20 different responses. Now the cloud is a part of our lives, and we don’t even think about it. Is AI will be the same way.”
Let’s all give a special thanks to Peter Tranitz for leading the Town Hall and steering IPC’s Design Initiative.
Share on:
Suggested Items
The Shaughnessy Report: Solving the Data Package Puzzle
05/12/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportIf you ask fabricators about their biggest challenges, they’ll often point at PCB designers—the readers of this magazine. Yes, you! Why is it so difficult to create the ideal data package? It’s a fairly straightforward task. But this part of the design process keeps tripping up designers, even those who started in the industry before Pink Floyd split up.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/09/2025 | Andy Shaughnessy, Design007 MagazineTrade show season is wrapping up as we head into summer. Where has the time gone? I hope you all get the chance to take a vacation this year, because I know you’ve earned one. Speaking of which, when was my last vacay? If I can’t remember, it’s probably time for one. It’s been a busy week in electronics, with fallout from the back-and-forth on tariffs taking up most of the oxygen in the room. We have quite an assortment of articles and columns for you in this installment of Must-Reads. See you next time.
Imec Coordinates EU Chips Design Platform
05/09/2025 | ImecA consortium of 12 European partners, coordinated by imec, has been selected in the framework of the European Chips Act to develop the EU Chips Design Platform.
New Issue of Design007 Magazine: Are Your Data Packages Less Than Ideal?
05/09/2025 | I-Connect007 Editorial TeamWhy is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal data package for your design.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.