Connect the Dots: How to Avoid Five Common Causes of Board Failure
Fresh PCB Concepts: Designing for Success at the Rigid-flex Transition Area 
Elementary Mr. Watson: Routing Hunger Games—May the Traces Be Ever in Your Favor
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
May 9, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Trade show season is wrapping up as we head into summer. Where has the time gone? I hope you all get the chance to take a vacation this year, because I know you’ve earned one. Speaking of which, when was my last vacay? If I can’t remember, it’s probably time for one.
It’s been a busy week in electronics, with fallout from the back-and-forth on tariffs taking up most of the oxygen in the room. We have quite an assortment of articles and columns for you in this installment of Must-Reads. See you next time.
Hunting for Clues: Feng Xue Solving Circuit Board 'Crimes' With AOI Standard
Published May 8
My ex-wife was a big fan of Agatha Christie’s Poirot, a PBS series about a Belgian detective named Hercule Poirot who always catches the bad guy. And as IPC’s Linda Stepanich explains in this IPC Community article, IPC standards committees often rely on the A-Team Hercule when creating standards to detect defects with AOI. Check it out.
Voices of the Industry: Alpha Circuit
Published May 6
Many are worried about the effects of tariffs on their bottom line in the short and long term. In this interview, Alpha Circuit CEO Prashant Patel explains how tariffs and the changing economy are impacting his company and the overall electronics manufacturing industry. As the Chinese say, “May you live in interesting times.”
Nick Koop Launches IPC Flex Design Class
Published May 6
More of our readers are moving into flex and rigid-flex design every year. They need more knowledge, but there aren’t many flex design classes available. TTM’s Nick Koop is filling the void with his new IPC class, Flex and Rigid-Flex Design for Manufacturability. This two-week course begins May 12, so if you’re working with flex or rigid-flex, don’t miss out.
Navigating Global Manufacturing in an Era of Uncertainty
Published May 7
Our old friend Phil Stoten is now the host of the IPC podcast MADE IN EUROPE. Phil always has his finger on the pulse of European electronics manufacturing, and he shares his thoughts on the current outlook on the continent. As he says, “For European manufacturing, adaptability is no longer just an advantage; it's essential for survival.”
Driving Innovation: Registration in PCB Production Throughout the Process
Published May 6
If you’ve ever encountered challenges with registration when fabricating a PCB, you’ll understand why columnist Simon Khesin compares this process to building the perfect cheeseburger: “You wouldn’t want your tomato sliding off one side, the patty leaning in the opposite direction, and the cheese hanging unevenly.” Speaking of cheeseburgers, is it time for lunch?
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
ASC Sunstone Circuits to Exhibit at AEMS 2025
09/09/2025 | American Standard CircuitsASC Sunstone Circuits will be exhibiting at AEMS 2025 (Anaheim Electronics and Manufacturing Show) to be held at the Anaheim Convention Center on September 24 and 25, 2025.
American Standard to Participate in European Microwave Week 2025
09/05/2025 | American Standard CircuitsAnaya Vardya, President, and CEO of American Standard Sunstone Circuits has announced that his company will once again be taking part in European Microwave Week, Europe’s premier RF, microwave, radar and wireless event, to be held from September 21-26, 2025 at Jaarbeurs in Utrecht, The Netherlands.
Fresh PCB Concepts: Designing for Success at the Rigid-flex Transition Area
08/28/2025 | Team NCAB -- Column: Fresh PCB ConceptsRigid-flex PCBs come in all shapes and sizes. Manufacturers typically use fire-retardant, grade 4 (FR-4) materials in the rigid section and flexible polyimide materials in the flex region. Because of the small size, some rigid-flex PCBs, like those for hearing aid devices, are among the most challenging to manufacture. However, regardless of its size, we should not neglect the transition area between the rigid and flexible material.
Global Flexible PCB Output Expected to Surpass $20 Billion by 2025, with AI Glasses Emerging as a New Growth Driver
08/25/2025 | TPCAThe Taiwan Printed Circuit Association (TPCA) and the Industrial Technology Research Institute (ITRI) released the "2025 Global Flexible PCB Industry Outlook" in August.
Missile Strike on Ukraine Hits Flex Facility
08/22/2025 | FlexOn the morning of August 21, 2025, our facility in Mukachevo, Ukraine, was damaged during a missile strike. Our emergency protocols were executed to ensure the full evacuation of the site.