Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
August Design007 Magazine: PCB Design Cost Drivers
August 8, 2024 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
Because 70 percent of the manufacturing costs of a product are determined in the design cycle, every decision a designer makes has some effect–good or bad–on the manufacturing cost, as well as the cost of the final product.
Fortunately, cost adders can be kept at bay: Designers can employ hundreds of tips, tricks, and techniques to keep costs down.
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value. When every decision has ramifications downstream, the more you know, the better.
Share on:
Suggested Items
PCB007 Magazine: November 2024—Engineering Economics
11/18/2024 | I-Connect007 Editorial TeamThe real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Marcy's Musings: Engineering Economics
11/19/2024 | Marcy LaRont -- Column: Marcy's MusingsThe real cost to manufacture a PCB, sometimes referred to as the "loaded cost," encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. Happy Holden calls it "Engineering Economics," and dedicated a chapter in his book, 24 Essential Skills for Engineers, to the subject.
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... DFM Essentials, Chapter 2
11/14/2024 | I-Connect007 Editorial TeamThe guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter discusses panelization, placing PCBs on manufacturing panels, highlighting features like coupons, borders, and scoring to maximize material utilization and reduce costs, and detailing preferred panel sizes and modifications.
Global Sourcing Spotlight: The Best Products to Buy Offshore Through Global Sourcing
11/12/2024 | Bob Duke -- Column: Global Sourcing SpotlightIn the evolving global sourcing landscape, the question isn’t just whether to buy offshore, but what to buy offshore. With advancements in manufacturing technologies, logistical efficiencies, and the global integration of supply chains, certain industrial products have become advantageous to source from overseas. Whether you're looking to cut costs, access specialized manufacturing capabilities, or ensure consistent quality, knowing which products offer the most benefits when purchased offshore is crucial. Here are some of the best products to consider beyond domestic borders.
Nortech Systems Reports Net Sales of $31.4 Million in Q3 2024
11/08/2024 | Nortech SystemsNortech Systems Incorporated, a leading provider of engineering and manufacturing solutions for complex electromedical and electromechanical products serving the medical, industrial and defense markets, reported financial results for the third quarter ended September 30, 2024.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in