Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
IPC Announces New Training Course: PCB Design for Manufacturability
January 10, 2025 | IPCEstimated reading time: Less than a minute
IPC announced the launch of a new training course: PCB Design for Manufacturability.
This three-week online program, taught by an industry expert with over 40 years of experience, is designed to equip PCB designers with the knowledge and skills to reduce or eliminate design, documentation, and capability issues that often arise during PCB fabrication.
Key Learning Objectives:
- Understand the importance of Design for Manufacturability (DFM) in the PCB design process.
- Learn how to identify and address potential manufacturing challenges early in the design phase.
- Gain a comprehensive understanding of PCB fabrication processes and capabilities.
- Develop best practices for creating manufacturable PCB designs.
Course Content:
- DfM Course Introduction, Fabricator Capability and Materials
- Panelization, Stackups and Surface Finishes
- Conductive Features, Holes/Vias and Other Mechanical Features
- Masks and Inks, Impedance and Signal Loss, and Electrical Test
- FPC, Documentation and Specifications
Participants will receive valuable resources, including:
- PCB Fabrication Design Rules: An editable document to help designers avoid common design issues and ensure compatibility with fabricator capabilities.
- Rigid PCB Fabrication Acceptance Specification: An editable document outlining recommended qualification and performance specifications for all IPC-6012 requirements.
Course Dates:
February 11, 2025 – February 27, 2025
Tuesdays and Thursdays, 12:00 PM – 2:00 PM CST
Registration: click here.
Share on:
Suggested Items
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.
Bell to Build X-Plane for Phase 2 of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
07/09/2025 | Bell Textron Inc.Bell Textron Inc., a Textron Inc. company, has been down-selected for Phase 2 of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program with the objective to complete design, construction, ground testing and certification of an X-plane demonstrator.
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
07/08/2025 | Prashant Patel -- Column: Facing the FutureThere has always been a subtle but significant divide between those who design and those who build printed circuit boards. It’s not a hostile gap, but it is a real one, and in today’s high-speed, high-complexity, high-stakes environment, that gap is costing us more than time and yield. It’s costing us innovation.
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in