-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Estimated reading time: 1 minute

Connect the Dots: Selecting the Right Board Thickness—A PCB Designer’s Balancing Act
Choosing wisely is critical for PCB quality and performance, but it can be tricky depending on size constraints, functional requirements, and environmental factors. While we sometimes have a general idea about assembly requirements or how the board will be used, there can still be a lot of unanswered questions as we begin the manufacturing process. After all, there’s a big difference between a PCB going into a drone and a PCB that will be part of a submersible drone and needs to be the size of a tennis ball, withstand intense heat or cold, and function forty fathoms below the surface.
When we receive a design, there’s a lot we can evaluate before production to ensure its manufacturability and functionality. However, we are limited in our ability to judge whether a board is too thick or too thin as designed. In general, you might think thicker is better because the board will be less brittle and won’t break as easily. But thicker is also heavier, hotter, and not appropriate for many applications or assemblies.
As you design your PCB, you should ask yourself:
- How thick does it need to be to work?
- How thin must it be to fit?
- What will it have to do?
To avoid producing boards that don’t fit into the assembly or fail to perform reliably, choose your thickness carefully. Here are some tips, guidelines, and checklists for ensuring proper fit and function.
Test Your Design Assumptions
Keep in mind, PCB design is often as much an art form as it is a science. It’s not as straightforward as plugging a bunch of numbers into an equation and receiving an answer.
To read this entire column, which appeared in the January 2019 issue of Design007 Magazine, click here.
More Columns from Connect the Dots
Connect the Dots: The Future of PCB Design and ManufacturingConnect the Dots: Proactive Controlled Impedance
Connect the Dots: Involving Manufacturers Earlier Prevents Downstream Issues
Connect the Dots: Stop Killing Your Yield—The Hidden Cost of Design Oversights
Connect the Dots: Designing for Reality—Routing, Final Fab, and QC
Connect the Dots: Designing for Reality—Surface Finish
Connect the Dots: Designing for Reality—Solder Mask and Legend
Connect the Dots: Designing for Reality: Strip-Etch-Strip