Fresh PCB Concepts: Designing PCBs for Harsh Environments—Reliability Is Engineered Upstream
Elementary, Mr. Watson DFX—Basically a Basket of Crabs With Spreadsheets
Target Condition: When Design Outpaces Manufacturing
Getting Our ‘Fil’ of Design Constraint Techniques
August 7, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Setting design constraints is one of the most critical parts of the PCB design process. The PCB designer must balance performance, manufacturability, and cost while addressing issues such as component function, signal integrity, thermal management, and EDA tool idiosyncrasies.
Filbert Arzola is a principal electrical engineer at Raytheon SAS and an instructor who teaches one of the few classes (that I know of) that focuses on setting design constraints. I asked Fil to share his thoughts on design constraints: the factors involved, the various trade-offs, and his best practices for optimizing constraints for your particular design. As Fil says, “Everything about a PCB is a constraint.”
What sort of pre-layout analysis should be performed before you begin setting constraints?
Filbert Arzola: When starting a new PCB board design, one must set up initial routing and clearance constraint settings to enable a good start to engineer your board design. However, one must first review and settle on the initial mechanical model that will house your board design. I highly advise every PCB board engineer to fully understand and confirm the mechanical aspects of the housing, including the outline, the amount and size of the mounting hole clearances, the type and size of the bolt and washer hardware, and most of all, if there are any 3D interferences. A nice DXF file that details all this information completes the electronic model to pre-analyze the mechanical aspect of the board design. One must understand why we constrain our designs and what doing so will give us in return. Having a solid, well-designed, and engineered mechanical model is a must to constrain a successful PCB model database.
To continue reading this interview, which originally appeared in the July 2025 issue of Design007 Magazine, click here.
Share on:
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
PCB Technologies to Exhibit at PCB East 2026
04/23/2026 | PCB Technologies Ltd.Issey Ende, PCB-Technolgies’ VP of Sales and Marketinghas announced that his company will be exhibiting at this year’s PCB East 2026, the premier East Coast conference and exhibition for the electronics design, fabrication, and assembly industry on Wednesday, April 29, 2026, at the DCU Convention Center in Worcester, Massachusetts.
Design for Test: A New Book from The Test Connection, Inc.
04/23/2026 | Real Time with... APEX EXPOBert Horner, president of The Test Connection Inc., shares insights on designing for testability (DFT) challenges with Kelly Dack. Horner discusses the critical need for incorporating testability early in the design process and the importance of quantifiable metrics for measuring test coverage. He highlights The Test Connection's role in transferring decades of 'tribal knowledge' to emerging engineers through training and education. Look for "The Printed Circuit Assembler's Guide to... Design for Test, A Practical Guide to Test and Inspection" in the I-007eBooks library.
Changing Times: Siemens Plans to Sell Former Mentor Graphics Wilsonville Campus
04/22/2026 | Nolan Johnson, I-Connect007Siemens announced it will be selling its Wilsonville, Oregon, property, which has served as the campus for Mentor Graphics, which was later acquired by German EDA-giant Siemens, as reported by The Oregonian on April 20. Siemens will maintain one building on the sprawling 53-acre campus, citing the move to hybrid and remote work over the past few years as a key factor in the decision.
Siemens Collaborates with TSMC to Advance AI for Semiconductor Design
04/22/2026 | SiemensSiemens announced the continuation of collaboration with TSMC to drive innovation in AI-powered automation and advanced semiconductor design enablement.
Standardization, Workforce, and the Road Ahead for Flex–Packaging Integration, Part 3
04/22/2026 | Anaya Vardya, American Standard CircuitsParts 1 and 2 of this series established the technical foundation and application landscape for the convergence of flexible PCBs and advanced semiconductor packaging. Part 3 addresses what comes next: the standards frameworks, talent pipelines, and strategic imperatives that will determine whether the industry can scale this convergence reliably and competitively.