Elementary, Mr. Watson: Rein in Your Design Constraints
Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
PhiChem Open House a Success!
March 28, 2016 | Pete Starkey, I-Connect007Estimated reading time: 5 minutes
Delighted to be invited to an exclusive preview of the new PhiChem global headquarters and R&D centre in Shanghai’s Baoshan suburb, I joined the VIP group assembled at the PhiChem booth at the CPCA show, made welcome by PhiChem President Dr. Jin Zhang.
An hour’s private bus ride brought us to an immaculately presented site—four brand-new buildings with a total of 500,000 square feet of floor area: administration, pilot plant manufacturing and packaging, warehousing, fronted by a spectacularly impressive six-story laboratory complex, which had taken five years from green-field site to completion.
Gleaming! Through reception and into a display area with glass showcases holding examples of PhiChem’s products and applications, and an appropriate place for Dr. Zhang to begin his explanation of PhiChem’s evolution since he founded the company in 2002.
A graduate chemist, with an MS degree in optics, and many years’ experience in microelectronics packaging and the development of optical and laser materials and components, Jin Zhang gained his doctorate in polymer chemistry at the University of Michigan in the U.S. Recognising the rapid growth in the demand for optical fibres for data and telecoms transmission, and a fundamental requirement for glass fibres to be coated for mechanical protection and enhancement of their optical properties, Dr. Zhang returned to China and began production of UV-curable coating resins in Shanghai. Since 2002, PhiChem has grown to become China’s largest supplier of UV-curable materials to the optical fibre industry and second largest in the world, producing all of its own raw materials and resin precursors.
Dr. Zhang reached into a display cabinet and took a short length of fibre from a large spool, explaining that the widespread use of high bandwidth optical fibre would not have been feasible without the protection afforded by UV-curable coatings. The sample he demonstrated had a coated diameter of 250 microns, the glass itself being half that diameter, and the combination of glass and coating had a tensile strength of five kilograms. Talking of high speed, he remarked that the fibre was coated and cured on-the-fly at 3000 metres per minute!
Page 1 of 3
Share on:
Suggested Items
SHENMAO Strengthens Semiconductor Capabilities with Acquisition of PMTC
07/10/2025 | SHENMAOSHENMAO America, Inc. has announced the acquisition of Profound Material Technology Co., Ltd. (PMTC), a premier Taiwan-based manufacturer of high-performance solder balls for semiconductor packaging.
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A