Elementary, Mr. Watson: The Design Matrix: Revealing the Hidden Truths of Reality
Connect the Dots: Designing for the Future of Manufacturing Reality—Surface Finish
The Pulse: Caught in the Crosshatch—A Cautionary Tale of Detective Work
Optical Network Hardware Market Notches Fastest-Growing 4th Quarter in 5 Years
February 24, 2016 | IHSEstimated reading time: 1 minute
The global optical network equipment market totaled $12.5 billion in 2015, growing 3 percent from the prior year, reports IHS Inc. in its Optical Network Hardware Market Tracker.
“After a subdued 3Q15, this quarter’s results represent a much-needed boost to the optical hardware market, with revenues demonstrating the fastest-growing fourth quarter for five years. Huawei and Alcatel-Lucent, in particular, performed well in the quarter, both gaining significantly in share compared to 3Q15,” said Alex Green, senior research director for IT and networking at IHS.
MORE OPTICAL HARDWARE MARKET HIGHLIGHTS
- In the 4th quarter of 2015 (4Q15), worldwide optical spending was $3.5 billion, up 17 percent sequentially, and up 10 percent from the year-ago quarter (4Q14)
- Spending on wavelength-division multiplexing (WDM) equipment in 4Q15 totaled $3.1 billion, up 18 percent from 4Q14
- EMEA (Europe, Middle East, Africa) has not yet come out of its era of slow optical spending, showing a rolling quarter decline of 3 percent in 4Q15
- And in North America there was somewhat of a bounce back in Q4 after a flat Q3, with the region seeing 5 percent rolling 4-quarter growth
- For the full-year 2015, the top 5 optical hardware market share leaders are, in rank order, Huawei, Ciena, Alcatel-Lucent, ZTE and Infinera
Share on:
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
05/13/2026 | Brittany Martin -- Column: The Marketing MinuteHypothetically, let’s say your marketing budget gets cut in half tomorrow. (I’m stressed just thinking about it!) But here’s the real question: Would your actual marketing strategy change, or just the amount of money behind it? Because those are not the same thing. Markets go up and down. Budgets can tighten. If your entire marketing approach depends on the biggest, flashiest, most expensive options available, that’s not really a strategy. It’s just spending. A strong marketing strategy should remain consistent regardless of spending levels.
Global Electronics Association and CalcuQuote, an Elisa Industriq Business, Launch Joint Supply Chain Intelligence Initiative
04/29/2026 | Global Electronics AssociationThe Global Electronics Association and CalcuQuote, Elisa Industriq today announced a partnership to deliver timely, actionable supply chain intelligence for the electronics industry.
Is China Plus One Still Happening in the PCB Industry?
04/28/2026 | Manfred Huschka, Manfred Huschka Management Consulting (Shenzhen) Ltd.For much of the past five years, China Plus One has been shorthand for supply-chain diversification: reducing dependency on mainland China by adding manufacturing capacity elsewhere in Asia. In the PCB industry, however, in early 2026, it is more nuanced. It looks less like a clean geographic shift and more like a layered, capital-intensive rebalancing of global capacity, one that still leaves China deeply embedded at the center.
It's Only Common Sense: See Your Marketing as a Discipline, Not a Department
04/27/2026 | Dan Beaulieu -- Column: It's Only Common SenseWhat does marketing mean to you? Is it a corner office with cool posters on the wall? Is it the person running your LinkedIn page or the trade show booth with the shiny graphics and the bowl of candy? Yes, marketing is those things, but it’s more than that. It’s a discipline, and if you treat it like a department, you’re already losing.
Roundtable: Advanced Materials
04/27/2026 | I-Connect007 Editorial TeamDriven largely by the need for advanced chip technology for super compute ability and AI applications, low Dk, low-loss resin systems, and heavy copper laminate are attracting significant attention and global resources. There are numerous unavoidable challenges in this market that will impact manufacturers and the supply chain, and they may be hitting critical mass sooner than OEMs and fabricators think. In this roundtable discussion, moderator Marcy LaRont speaks with topic experts: Mark Goodwin, John Fix, and Ed Kelley.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in