Fresh PCB Concepts: Designing PCBs for Harsh Environments—Reliability Is Engineered Upstream
Elementary, Mr. Watson DFX—Basically a Basket of Crabs With Spreadsheets
Target Condition: When Design Outpaces Manufacturing
Designing for Reliability: Why Understanding Materials, Cleanliness, and Lifecycle Matters More Than Ever
January 28, 2026 | Marcy LaRont, I-Connect007Estimated reading time: 1 minute
Before a product enters manufacturing—long before the first panel hits the assembly line—its reliability is determined by a series of fundamental design decisions. Designing a PCB is not simply a matter of placing components on a board and sending the files to manufacturing. Designing for reliability requires a holistic approach.
Every material, from solder mask and laminate to flux and solder alloy, interacts with processing chemistry, environmental contaminants, and thermal cycling throughout the product’s lifetime. The environment in which the product is expected to work, and its intended lifecycle demands, must be understood at the outset. Failing to consider the design from every aspect can turn a promising design into a very expensive cautionary case study.
Flex Ltd. (formerly Solectron/Flextronics International) is one of the largest EMS providers in electronics manufacturing today. At productronica, Tiberiu (Tibi) Baranyi of Flex presented a comprehensive presentation on design for reliability, providing real-world case examples that illustrated the unfortunate outcomes of decisions that caused failures, and which should have been made differently. I spoke with him about why this topic is so important for designers to understand from the outset.
Marcy LaRont: Tibi, if there is one word on everyone’s lips, other than AI, it’s reliability. With today’s technology demands, the challenges around guaranteeing reliability are significant.
Tiberiu Baranyi: Yes, this is a key point. Before a design rolls into manufacturing, before it even progresses from concept to the initial phases of the design process, there are questions that must be answered. Product application, operating environment, and its expected lifecycle are three primary pieces of information you must have to create a successful design. Many factors need to come together in the design. It's not just throwing components on a printed writing board. Understanding your product’s end operating environment also dictates the best processes to use in manufacturing. These are things that must be considered and communicated when creating the design.
To continue reading this interview, which originally appeared in the January 2026 I-Connect007 Magazine, click here.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
PCB Technologies to Exhibit at PCB East 2026
04/23/2026 | PCB Technologies Ltd.Issey Ende, PCB-Technolgies’ VP of Sales and Marketinghas announced that his company will be exhibiting at this year’s PCB East 2026, the premier East Coast conference and exhibition for the electronics design, fabrication, and assembly industry on Wednesday, April 29, 2026, at the DCU Convention Center in Worcester, Massachusetts.
Design for Test: A New Book from The Test Connection, Inc.
04/23/2026 | Real Time with... APEX EXPOBert Horner, president of The Test Connection Inc., shares insights on designing for testability (DFT) challenges with Kelly Dack. Horner discusses the critical need for incorporating testability early in the design process and the importance of quantifiable metrics for measuring test coverage. He highlights The Test Connection's role in transferring decades of 'tribal knowledge' to emerging engineers through training and education. Look for "The Printed Circuit Assembler's Guide to... Design for Test, A Practical Guide to Test and Inspection" in the I-007eBooks library.
Changing Times: Siemens Plans to Sell Former Mentor Graphics Wilsonville Campus
04/22/2026 | Nolan Johnson, I-Connect007Siemens announced it will be selling its Wilsonville, Oregon, property, which has served as the campus for Mentor Graphics, which was later acquired by German EDA-giant Siemens, as reported by The Oregonian on April 20. Siemens will maintain one building on the sprawling 53-acre campus, citing the move to hybrid and remote work over the past few years as a key factor in the decision.
Siemens Collaborates with TSMC to Advance AI for Semiconductor Design
04/22/2026 | SiemensSiemens announced the continuation of collaboration with TSMC to drive innovation in AI-powered automation and advanced semiconductor design enablement.
Standardization, Workforce, and the Road Ahead for Flex–Packaging Integration, Part 3
04/22/2026 | Anaya Vardya, American Standard CircuitsParts 1 and 2 of this series established the technical foundation and application landscape for the convergence of flexible PCBs and advanced semiconductor packaging. Part 3 addresses what comes next: the standards frameworks, talent pipelines, and strategic imperatives that will determine whether the industry can scale this convergence reliably and competitively.