Connect the Dots: How to Avoid Five Common Causes of Board Failure
Elementary Mr. Watson: Routing Hunger Games—May the Traces Be Ever in Your Favor
Target Condition: Floor Planning Without a Floor
Talking with Tamara: Floor Planning Policies
September 4, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Tamara Jovanovic is an electrical engineer with Masimo, a medical equipment manufacturer. She’s been designing PCBs for seven years and earned a master’s degree in electrical engineering in 2022. I asked Tamara to share her thoughts on floor planning—the challenges, techniques, and advice for designers setting up floor planning strategies.
Andy Shaughnessy: What is the objective of floor planning during PCB design?
Tamara Jovanovic: For any new circuit board design, the floor planning step typically occurs when the schematic is finalized (or nearly finalized) and before layout and routing begin. The objective of floor planning is to ensure that what you're designing is most optimized from the signal integrity perspective—ESD/EMI, as well as mechanical and thermal.
The idea is to place large components on the circuit board first, especially those that interact with mechanical features of the design and to isolate noise sensitivity on the board. This process is typically carried out by the PCB design engineer in collaboration with a mechanical engineer, using design tools to place components and align/mate them with mechanical elements, as well as to make sure there is enough separation for sensitive signals that need proper isolation/grounding.
Shaughnessy: What factors figure into the floor planning process?
Jovanovic: First and foremost, designers need to make sure that they're choosing components that will fit in the final product's mechanical enclosure and on the board shape previously agreed upon. It's also important to have an early plan for the board's layer stackup, or how many layers the board shall have and what each layer will be designated for (i.e., signal or power/ground).
Most of the time, the first components that are placed on the board are main design elements such as main processors and power ICs, which often require special design considerations and proper thermal management. Next, we have components that carry sensitive signals, such as clocks, crystals and RF parts. Those usually require careful handling when it comes to grounding and impedance, so it's always good practice to plan their placement early and ensure they are properly isolated.
To continue reading this interview, which originally appeared in the August 2025 edition of Design007 Magazine, click here.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Kris Moyer Discusses His Emerging Design Technologies Class
09/04/2025 | Marcy LaRont, I-Connect007Kris Moyer, a design instructor for the Global Electronics Association, will be teaching his advanced PCB design class this fall. If you’re ready to level up your design education, you won’t want to miss this interview. The PCB Design for Emerging Design Technologies course is designed to provide the skills necessary to create PCB/PBA designs that require cutting-edge emerging design technologies and comply with all necessary IPC standards, including new standards being developed in this area.
Synopsys Announces Expanding AI Capabilities for its Leading EDA Solutions
09/04/2025 | SynopsysSynopsys announced expanding Synopsys.ai™ Copilot generative AI (GenAI) capabilities for its industry-leading semiconductor design solutions, enabling semiconductor engineering teams to accelerate development timelines, support significantly more complex designs, and increase engineering velocity amidst a workforce shortage.
UHDI Fundamentals: UHDI Technology and Industry 4.0
09/03/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is rapidly transforming how smart systems are designed and deployed in the context of Industry 4.0. With its capacity to support highly miniaturized, high-performance, and densely packed electronics, UHDI is a critical enabler of the smart, connected, and automated industrial future. Here, I’ll explore the synergy between UHDI and Industry 4.0 technologies, highlighting applications, benefits, and future directions.
Pentalogix Launches ViewMate Essentials to Ensure PCB Designs are Manufacturing-Ready
09/03/2025 | PentaLogixPentalogix, Inc., a leader in PCB design solutions, announced the launch of ViewMate Essentials, an advanced CAM package designed to enhance the workflow of PCB designers. Available starting September 2nd, 2025, ViewMate Essentials enables designers to view, edit, and manage PCB manufacturing files with exceptional precision, facilitating seamless collaboration with PCB fabricators and assemblers.
The Global Electronics Association Launches Design Village at APEX EXPO 2026
09/02/2025 | Global Electronics AssociationAPEX EXPO, the hallmark electronics tradeshow hosted by the Global Electronics Association, announced the launch of the Design Village, a new feature in the exhibit hall that will unite the world’s leading innovators and showcase next-generation solutions for the electronics industry.