-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePower Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
China Plus One, Part 3: Inorsen Group, a Vietnam Success Story
July 3, 2025 | Manfred Huschka, Manfred Huschka Management Consulting (Shenzhen) Ltd.Estimated reading time: 1 minute
(Editor’s note: Part 1 explored “Does China Plus One Actually Work?” looking at manufacturing in China. Part 2, “Does China Plus One Really Make a Difference,” looked at how industrial regions benefit from investments outside of China and what each potentially means to both manufacturers and their customers.)
In recent years, Western OEMs have continued to push for China Plus One factories and the advancement of China’s Belt and Road Initiative (BRI). At present, there are two main modes for PCB companies to go global: building greenfield factories or through mergers and acquisitions (M&A). Thailand is currently the primary geographic choice to build greenfield factories, whereas, increasingly, mergers and acquisitions in Vietnam and Malaysia provide opportunities for companies to expand markets and acquire resources.
Not surprisingly, Chinese companies have become increasingly involved in international trade and overseas investment within the China Plus One framework. The Inorsen Group was one of the first PCB companies to invest in Vietnam.
The Inorsen Group has 125,000 m2 PCBs/month of capacity and manufactures double-sided plated through-hole (PTH), multilayer, flexible, rigid-flex PCBs, as well as RF PCBs, including PIM-tested PTFE PCBs. In 2019, Inorsen expanded to the Jiangsu Province as well as Vietnam, through the acquisition of the former SEWOO GLOBAL PCB factory, renamed Inorsen Vina CO., LTD. Located in the Phu Tho Province of Vietnam, Inorsen’s Vietnam facility has an annual output of 1.2 million m2 PCBs, primarily up to eight layers.
General Manager Xu Lidong (John Xu), who established the company in 2012 in Shenzhen, China, provides a detailed explanation for why he simultaneously expanded into Vietnam and China’s Jiangsu Province.
To read the interview, which originally appeared in the June 2025 PCB007 Magazine, click here.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Critical Minerals: The New Power Play in Global Trade
10/13/2025 | Marcy LaRont, I-Connect007Access to critical minerals essential for electronics manufacturing, and China’s monopoly of them, is increasingly under scrutiny, with gallium (Ga) and germanium (Ge)at the forefront of this discourse. However, all critical minerals imported from China share a similar narrative, and understanding the implications of this dependency and the risks to both U.S. commercial and defense sectors has created an urgent need for a comprehensive electronics strategy to secure and diversify access to these vital minerals. In this candid interview, USPAE Executive Director Jim Will discusses the issues and the mitigation steps that must be taken to adequately address them.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/26/2025 | Marcy LaRont, I-Connect007Though the news cycle felt a little less exclamatory this week, there were many global business news headlines worth revisiting. Among them, China announced a bold carbon emissions goal of 10% over the next decade to double its solar and wind power capacity. The Wall Street Journal published an article, “Global Port Leaders See Trade Shifting, Not Slowing,” a nod to businesses’ risk mitigation strategies and execution around overreliance on China coming into play in a bigger way.
Global Citizenship: Together for a Perfect PCB Solution
09/10/2025 | Tom Yang -- Column: Global CitizenshipIf there’s one thing we’ve learned in the past few decades of electronics evolution, it’s that no region has a monopoly on excellence. Whether it’s materials science breakthroughs in Europe, manufacturing efficiencies in China, or design innovations in Silicon Valley, the PCB industry thrives on collaboration.
Dan's Biz Bookshelf: 'Apple in China: The Capture of the World’s Greatest Company'
09/04/2025 | Dan Beaulieu -- Column: Dan's Biz BookshelfMost of what we hear about Apple’s relationship with China is half-baked punditry or political noise. However, Patrick McGee’s "Apple in China: The Capture of the World’s Greatest Company" is a tour de force that peels back the PR polish and shows us what’s really going on behind that gleaming bitten fruit.
More Than a Competition: Instilling a Champion's Skill in IPC Masters China 2025
09/01/2025 | Evelyn Cui, Global Electronics Association—East AsiaNearly 500 elite professionals from the electronics industry, representing 18 provinces and municipalities across China, competed in the 2025 IPC Masters Competition China, March 26–28, in Pudong, Shanghai. A total of 114 contestants advanced to the practical competition after passing the IPC Standards Knowledge Competition. Sixty people competed in the Hand Soldering and Rework Competition (HSRC), 30 in the Cable and Wire Harness Assembly Competition (CWAC), and 24 in the Ball Grid Array/Bottom Termination Components (BGA/BTC) Rework Competition.