-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Sypris Reports Fourth Quarter Results
March 27, 2025 | BUSINESS WIREEstimated reading time: 4 minutes
Sypris Solutions, Inc. reported financial results for its fourth quarter and full-year ended December 31, 2024.
Highlights:
- The Company’s gross profit for the quarter increased 23.1% from the prior-year period, while gross margin expanded 350 basis points.
- For the full year, the Company’s gross profit increased 15.3% from the prior year, while gross margin increased 150 basis points.
- Gross profit for Sypris Technologies surged 41.6% for the quarter and 39.3% for the full year, reflecting favorable exchange rates, improved mix and productivity improvements. Orders for energy products were up 8.6% year-to-date.
- EPS for the quarter increased $0.06 to $0.01 per diluted share, up from a loss of $0.05 per diluted share for the prior-year period.
- The Company announced its financial guidance for 2025, projecting revenue between $125-$135 million, gross margin expansion in the range of 150 to 175 basis points, and a forecast of 10-15% increase in gross profit. The revenue outlook partly reflects the conversion of certain shipments from our facility in Mexico to a value-add only sub-maquiladora basis.
“We are pleased with the year-over-year revenue growth at Sypris Technologies, driven by an increase in sales of our energy products during the period,” commented Jeffrey T. Gill, President and Chief Executive Officer. “Orders for our energy products increased during the year, and additional opportunities for growth may exist with new global projects in support of increasing LNG demand including support for the steep increase in electricity demand from data centers to support AI. We are also actively pursuing applications for our products in adjacent markets including CO2 capture to further diversify our industry and customer portfolios.
“Demand from Sypris Technologies customers serving the automotive, commercial vehicle, sport utility and off-highway markets has remained relatively stable, with new product line shipments helping to offset the anticipated cyclical decline for the commercial vehicle market. We believe that the market diversification Sypris Technologies has accomplished over recent years by adding new programs in the automotive, sport-utility and off-highway markets will help offset some of this decline.
“The backlog at Sypris Electronics exceeds $90 million and is expected to support growth through 2025 and beyond. Customer funding has already been secured for a significant portion of these key programs, which enables us to procure inventory under multi-year purchase orders to mitigate future supply chain issues.”
Fourth Quarter and Full-Year Results
The Company reported revenue of $33.4 million for the fourth quarter ended December 31, 2024, compared to $34.7 million for the prior-year comparable period. The Company reported net income of $0.1 million, or $0.01 per diluted share, compared to a net loss of $1.1 million, or $0.05 per diluted share, for the prior-year period.
For the full-year 2024, the Company reported revenue of $140.2 million compared with $136.2 million for the prior year. The Company reported a net loss of $1.7 million, or $0.08 per share, for 2024 compared with a net loss of $1.6 million, or $0.07 per diluted share, for the prior year.
Sypris Technologies
Revenue for Sypris Technologies was $19.5 million in the fourth quarter of 2024 compared to $19.0 million for the prior-year period, reflecting strong energy shipments during the period, partially offset by the anticipated cyclical decline in the commercial vehicle market. Gross profit for the fourth quarter of 2024 was $4.4 million, or 22.5% of revenue, compared to $3.1 million, or 16.3% of revenue, for the same period in 2023. Gross profit for the fourth quarter of 2024 benefited from a favorable mix and favorable exchange rates.
Sypris Electronics
Revenue for Sypris Electronics was $13.9 million in the fourth quarter of 2024 compared to $15.7 million for the prior-year period. Material delays and supplier quality issues caused a temporary delay in shipments for the period. Gross profit for the fourth quarter of 2024 was $1.0 million, or 7.1% of revenue, compared to $1.3 million, or 8.1% of revenue, for the same period in 2023 primarily due to the lower revenue, an unfavorable mix and additional labor and overhead costs incurred on programs that recently ramped production.
Outlook
Commenting on the future, Mr. Gill added, “Demand from customers serving the markets for electronic warfare, aircraft and missile avionics, secure and subsea communications, and ground-based radar remain robust, while the outlook for the energy market continues to move in the right direction. Similarly, demand from customers serving the automotive, commercial vehicle and sport utility markets remains healthy despite the anticipated cyclical decline in the commercial vehicle market.
“With a strong backlog, new program wins, and continued long-standing contractual relationships in place, we are confident 2025 has the potential to be very positive for Sypris. While we anticipate a modest decline in revenue reported resulting from the conversion of certain shipments from Mexico to the U.S. into a sub-maquiladora, and the cyclical decrease in production volumes in the commercial vehicle market, we expect the combined strength of our backlog for Sypris Electronics and increasing orders for our energy products to largely serve as an offset. Additionally, we expect to achieve gross margin expansion in the range of 150 to 175 basis points, with gross profit expected to grow 10-15% in 2025.”
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
ViTrox Unveils Smart 3D AOI Solutions, Pioneering Dual-Sided Inspection and Robotic Vision Solutions for Back-end Assembly Processes
08/04/2025 | ViTroxViTrox, which strives to be the World’s Most Trusted Technology Company, proudly announces the launch of its new-generation innovations in Automated Optical Inspection (AOI) technology for back-end assembly processes.
Transition Automation to Debut Sliding Paste Retainers at SMTA International
08/04/2025 | Transition Automation (TA)Transition Automation, Inc. (TA) will exhibit a new Paste Retainer option in booth 2947 at the SMTA International 2025, taking place from Oct. 21-23, 2025, at the Donald E. Stephens Convention Center in Rosemont, IL.
August 2025 SMT007 Magazine: Supply Chain Strategies
08/04/2025 | I-Connect007 Editorial TeamBelieve it or not, how you manage your supply chain has a noticeable impact on how your brand is perceived. In this issue of SMT007 Magazine, we explore the connection between supply chain practices and brand perception—and what you can do to strengthen it.
Indium Corporation Introduces New Flip-Chip Flux for Semiconductor Devices
07/31/2025 | Indium CorporationIndium Corporation, a leading materials refiner, smelter, manufacturer, and supplier, today announced the global availability of WS-910 Flip-Chip Flux, a new water-soluble flip-chip dipping flux designed to meet the demands of cutting-edge semiconductor devices.
FlashPCB Enhances SMT Production Line with Heller 1809 Reflow Oven and KIC ProBot
07/31/2025 | FlashPCBFlashPCB, a leading provider of quick-turn PCB assembly, has expanded its surface mount production capabilities with the installation of a Heller 1809 MKII reflow oven paired with the KIC ProBot automatic profiling system. This addition supports FlashPCB’s goal of achieving faster throughput, higher quality assurance, and consistent process control across a wide range of PCB builds.