-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC Releases January 2025 Global Sentiment of the Electronics Manufacturing Supply Chain Report
January 28, 2025 | IPCEstimated reading time: 1 minute
Demand in the electronics industry recovered to 100 in December, marking the threshold between contraction and expansion after four consecutive months below this level according to IPC’s January Sentiment of the Global Electronics Manufacturing Supply Chain Report. Of the four demand components, the Backlog Index remained below 100 and was the only component unchanged over the past month. The New Orders Index rose by four points to 102, moving marginally into expansion territory. Similarly, the Shipment Index increased by four points, reflecting broader improvements in volume indicators.
Cost pressures continue to challenge operations. The Labor Costs Index held steady this month, while the Material Costs Index climbed three points, recovering slightly from its all-time low. However, aggregated cost indicators reached a four-month high, signaling persistent cost pressures on operations.
In response to special questions regarding companies’ current work from home practices, minimal changes are expected in 2025 work arrangements. Factory floor policies remain rooted in traditional on-site requirements, reflecting the operational challenges and technical demands of these roles. Europe stands out with the largest flexibility increase, as hybrid arrangements are projected to grow by 5 percent.
“While 2025 work-from-home policies suggest incremental shifts toward flexibility, particularly in APAC and Europe, these changes are more pronounced for non-factory employees,” said Shawn DuBravac, Ph.D., IPC chief economist and report author. “For factory floor employees, minor increases in hybrid work are anticipated, but on-site roles remain the overwhelming standard, underscoring the rigidity of these positions,” Dr. DuBravac added.
Additional survey data show:
- Half of electronics manufacturers are currently experiencing rising labor (52 percent) and material (51 percent) costs.
- European electronics manufacturers, along with those operating globally, anticipate a decline in material costs over the next six months more so when compared to North American electronics manufacturers.
- Over the next six months, electronics manufacturers expect labor and material costs to remain high, with ease of recruitment likely to remain challenging.
These results are based upon the findings of IPC’s Current State of Electronics Manufacturing Survey, fielded between December 11 and December 31, 2024.
Read the full report.
Suggested Items
NEPCON ASIA 2025: Innovating Smart Manufacturing Ecosystems and Bridging Global Opportunities
07/11/2025 | PRNewswireTaking place from October 28 to 30, 2025 at the Shenzhen World Exhibition & Convention Center (Bao'an), NEPCON ASIA is the premier platform to discover the latest technologies and market trends, connect with new suppliers and products, and explore potential partnerships and distribution opportunities.
Mycronic Delivers Strong Q2 Performance and Raises 2025 Outlook to SEK 7.5 Billion
07/11/2025 | MycronicMycronic reported a 35% increase in Q2 net sales and a 27% EBIT margin, prompting an upward revision of its full-year 2025 revenue forecast to SEK 7.5 billion.
Kitron Reports Strengthening Momentum in Q2 2025
07/10/2025 | KitronKitron reported solid quarterly sales and profits, particularly driven by the Defence & Aerospace market sector.
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
Webinar Review: A Global Trade and Economy in Flux
07/09/2025 | I-Connect007 Editorial TeamIn a July 8 webinar, Global Electronics Association Chief Economist Shawn DuBravac provided a comprehensive analysis of the evolving international trade environment, its implications for inflation, monetary policy, and labor dynamics, and a sober assessment of market valuations. In “Navigating a Shifting Landscape” DuBravac painted a picture of a global economy in flux, where shifting trade alliances and tariff structures are redrawing the supply chain map and influencing the broader economic landscape, while also conveying an overall bullish market outlook.