Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Beyond Design: The Metamorphosis of the PCB Router
ZESTRON South Asia releases whitepaper – Impact of Cleaning Technology on Discrete Packaging - The Difference in Wire Bonding Yield
December 2, 2024 | ZESTRONEstimated reading time: 1 minute
ZESTRON, the global leading provider of high precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, is pleased to release the whitepaper “Impact of Cleaning Technology on Discrete Packaging - The Difference in Wire Bonding Yield”
Whitepaper Abstract:
Lead frame packages are commonly used in semiconductor package fabrication, where interconnections between the integrated circuits (IC) and the metal leads are typically established through die attach and wire bonding processes. Standard materials like epoxies, adhesives, or solder pastes are most often used in the die attach process. However, it is critical to remove any flux residues left behind after soldering before proceeding with wire bonding and molding to ensure maximum yield in packages that use solder paste for die attachment. One of the most widely used cleaning agents to remove flux residues is isopropyl alcohol (IPA). While IPA is commonly used as a general cleaner in the electronics industry, it is not the most effective solution for flux removal.
Semiconductor package manufacturers produce millions of units daily and therefore, a small improvement in the wire bonding yield can significantly impact production efficiency and the overall product costs.
One such OEM was producing lead frame packages and using IPA (Isopropyl alcohol) in the ultrasonic cleaning process. However, their process resulted in a wire bonding yield of only 98%, measured after the molding and deflashing processes. This indicated significant motivation to improve the cleaning process and the wire bonding yield.
A Design of Experiment (DOE) was developed to assess alternative cleaning agents and process equipment, aiming to optimize the cleaning process and to be evaluated based on the improvement in wire bonding yield. Process qualification was conducted through a pull test according to the MIL-STD-883E method 2011.7. Throughout the DOE process iterations, process improvements were identified through visual inspection, pull and shear testing as well as overall yield measurement from the wire bonding process.
Share on:
Suggested Items
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
The Death of the Microsection
06/26/2025 | Bob Neves, Reliability Assessment Solutions, Inc.I got my start out of college grinding and polishing PCB microsections. My thumbs are a bit arthritic today because of the experience (microsection grinders know what I mean). Back then, via structures were rather large, and getting to the center in six steps of grinding and polishing was easy compared to what my team has been doing recently at the lab.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
ASC Sunstone Circuits and Screaming Circuits Partner to Launch Online Assembly Parts Ordering – A New Step Toward Seamless PCB Production
06/23/2025 | ASC SunstoneIn a major step toward simplifying the PCB manufacturing and assembly process, ASC Sunstone Circuits and Screaming Circuits are proud to announce the launch of a new online assembly parts ordering feature, now available through Sunstone.com. This enhanced capability allows customers to source assembly components as part of their PCB order, creating a fully integrated experience from bare board fabrication to finished assembly.