Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Beyond Design: The Metamorphosis of the PCB Router
The Death of the Microsection
June 26, 2025 | Bob Neves, Reliability Assessment Solutions, Inc.Estimated reading time: 1 minute
I got my start out of college grinding and polishing PCB microsections. My thumbs are a bit arthritic today because of the experience (microsection grinders know what I mean). Back then, via structures were rather large, and getting to the center in six steps of grinding and polishing was easy compared to what my team has been doing recently at the lab.
HDI, ultra HDI, substrates, embedded components, and the plethora of (tiny) via structures (micro, stacked, buried, staggered, etc.) that connect everything in today’s “boards” make arriving at a via structure’s center using a microsection a true nightmare—and a miracle for the lab technician if attained.
Our historical faith in the microsection stems from the belief that:
- Evaluating the visible attributes of the via structure will demonstrate the quality and reliability that the PCB represents
- Looking at the two sidewalls at the center of a 360-degree via structure will demonstrate the quality and reliability of the entire structure
- Looking at a few via structures from the many thousands on a panel will demonstrate the quality and reliability of all the structures on a panel
You can likely discern that more “faith and belief” are involved in interpreting the results from the microsectioning process than in statistical significance.
In addition to looking at the visual attributes (“prettiness”) of sections from a few via structures, some are also floated on a solder pot before microsectioning. We are meant to believe those few floated via structures will demonstrate the PCB’s ability to survive the component attachment process. While a single wave solder process may have been the norm many years ago, we now primarily attach components with convection reflow. Today’s component attachment process may also include replacement of components, attachment of connectors, and hand soldering of various parts and wires, which ultimately exposes the PCB to several soldering temperature cycles before truly beginning its life in the field. This is something that is not being captured in today’s solder float and microsection process.
To continue reading this article, which originally appeared in the June 2025 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Netomnia Selects VIAVI Remote Fiber Test System to Accelerate Network Expansion in the UK VIAVI Solutions
06/24/2025 | PRNewswireVIAVI Solutions Inc. announced that alternative network (Alt-Net) operator Netomnia has chosen VIAVI's ONMSi Remote Fiber Test System (RFTS) to simplify and accelerate network installation and ongoing maintenance as the company rapidly expands its business in the UK.
The Chemical Connection: Through-glass Vias in Glass Substrates
06/24/2025 | Don Ball -- Column: The Chemical ConnectionThis month’s theme is vias and how best to ensure via quality and reliability. I don’t have much expertise in this process area or much to contribute that most of you don’t already know. However, I’ve recently become peripherally involved in a via technology that may be of more than academic interest to some of us. It entails putting vias in a material not usually associated with PCB manufacturing: through-glass vias (TGVs) in glass substrates.
Boeing, Angolan Ministry of Transport Sign Memorandum of Strategic Cooperation
06/21/2025 | BoeingBoeing and the Ministry of Transport of the Republic of Angola signed a Memorandum of Strategic Cooperation to explore initiatives aimed at advancing the Angolan aviation sector, in partnership with TAAG Angola Airlines.
Marcy's Musings: The Hole Truth—Via Integrity in an HDI World
06/17/2025 | Marcy LaRont -- Column: Marcy's MusingsThis month, we’re talking about “the hole truth,” namely, via reliability in an HDI world. As I contemplated what it takes to get the “perfect” via, it got me thinking about what it takes to create the “perfect” magazine issue.
Boeing 20-Year Forecast Shows Steady Demand for Nearly 44,000 New Airplanes
06/15/2025 | BoeingEmerging markets, with expanding middle classes, dynamic and competitive airline networks and sustained aviation investment, will play an outsized role in global air traffic growth, helping drive a need for 43,600 commercial airplanes over the next 20 years, Boeing projected.