Dana on Data: The Missing AI-NPI Link
Beyond Design: Key SI Considerations for High-speed PCB Design
Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
September Design007 Magazine: Silicon to Systems
September 9, 2024 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
Silicon to Systems: From Soup to Nuts
Traditionally, most designers of PCBs and ICs have operated in separate silos, unaware of much of what is happening just upstream or downstream. IC designers did their thing and PCB designers did theirs, and everything worked—until recently, that is.
Now, the increase in complexity in electronics is driving technologists throughout the electronics supply chain to adopt a “silicon to systems” outlook. Advanced packaging systems are causing PCB designers problems with signal integrity, power delivery requirements, and thermal issues.
This month, in the September 2024 issue of Design007 Magazine, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain—from soup to nuts.
Share on:
Suggested Items
Calling All Designers: The Latest Design Technology and AI
03/20/2025 | Andy Shaughnessy, Design007 MagazineAdvanced design technology and AI were in the spotlight at the annual Design Town Hall, held March 19 during IPC APEX EXPO 2025. Speakers included IPC’s Peter Tranitz, Matt Kelly, Devan Iyer, as well as a panel on the use of AI in PCB design moderated by Susan Kayesar of Siemens.
Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
03/13/2025 | John Watson -- Column: Elementary, Mr. WatsonAt the 2020 Tokyo Summer Olympics, the U.S. men's 4x100-meter relay team had high hopes of winning a medal. The team comprised some of the fastest sprinters in the world, but something went wrong. In a relay, four runners must smoothly pass their baton to the next runner inside a zone on the track. If a runner drops the baton or it’s passed outside the zone, the team risks disqualification. The U.S. team’s pass between the second and third runner was messy, slowing them down. By the time the last runner received the baton, the team had lost too much time. They finished sixth in their heat and didn’t qualify for the final.
Speaking the Same Language as Your Fabricator
03/12/2025 | Andy Shaughnessy, Design007 MagazineWe do indeed have a failure to communicate; designers and fabricators often seem to be talking past each other, which can lead to jobs being put on hold. We asked Jen Kolar, VP of engineering for Monsoon Solutions, and columnist Kelly Dack to share their thoughts on ways that we can break down the communication barrier between design and fabrication. As they point out, a design kickoff checklist and a solid review process can be invaluable tools in a designer’s toolbox.
The Shaughnessy Report: Breaking Down the Language Barrier
03/11/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportAccording to Ethnologue’s 2024 update, there are currently 7,164 living languages being spoken today. It makes you wonder: Do they count PCB design as a language? PCB fabrication? Assembly?
Design007 Magazine March 2025: Learning to Speak 'Fab'
03/10/2025 | I-Connect007 Editorial TeamOur expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders in the March 2025 issue of Design007 Magazine. But as you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.