-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Cadence Announces 8533Mbps LPDDR5X IP Solution for Next-Gen AI, Automotive and Mobile Applications
December 23, 2022 | Cadence Design Systems, Inc.Estimated reading time: 1 minute

Cadence Design Systems, Inc. announced the first LPDDR5X memory interface IP design optimized to operate at 8533Mbps—up to 33% faster than the previous generation of LPDDR IP. Available now for customer engagements, the Cadence® LPDDR5X IP boasts a new high-performance, scalable and adaptable architecture based on Cadence’s proven and highly successful LPDDR5 and GDDR6 product lines. The new Cadence LPDDR5X memory IP solution consists of a silicon-proven PHY and high-performance controller designed to connect to LPDDR5X DRAM devices that follow the JEDEC JESD209-5B standard. The controller/PHY interface is based on the latest DFI 5.1 specification, and a variety of on-chip buses are supported.
LPDDR5X memory opens up a wide variety of high-bandwidth applications beyond the mobile market traditionally served by LPDDR memory, including advanced driver assistance systems (ADAS), autonomous driving, lower-end edge AI and networking. Cadence LPDDR5X IP is designed to enable the industry’s next-generation SoC designs for these and other applications with flexible floorplan design options, while the new architecture allows fine-tuning of power and performance based on individual application requirements.
Cadence design IP supports the fastest data rate defined by the JEDEC standard (JESD209-5B). Cadence’s LPDDR5X Controller and PHY have been verified with Cadence’s Verification IP (VIP) for LPDDR5X to provide rapid IP and SoC verification closure. Cadence VIP for LPDDR5X includes a complete solution from IP to system-level verification with DFI VIP, LPDDR5X memory model and System Performance Analyzer.
“LPDDR5X’s peak speeds will raise the bar for device experiences and performance at the edge, from automotive to consumer IoT to networking devices,” said Michael Basca, vice president of products and systems in Micron’s Embedded Business Unit. “Our collaboration with Cadence will accelerate ecosystem adoption of LPDDR5X by enabling the next wave of chipsets to work seamlessly with this low-power, high-performance memory.”
“Cadence LPDDR5X IP operating at 8533Mbps in silicon showcases Cadence’s next-generation architecture for complete memory system IP solutions,” noted Sanjive Agarwala, corporate vice president and general manager of the IP Group at Cadence. “This new leading-edge memory IP solution solidifies our memory interface IP leadership by enabling the industry’s future AI, automotive and mobile SoC designs today.”
The LPDDR5X IP supports Cadence’s Intelligent System Design™ strategy, which enables SoC design excellence with high-performance, design-optimized, best-in-class technology.
Suggested Items
Microchip Enters into Partnership Agreement with Delta Electronics on Silicon Carbide Solutions
07/18/2025 | Globe NewswireThe growth of artificial intelligence (AI) and the electrification of everything are driving an ever-increasing demand for higher levels of power efficiency and reliability.
ESD Alliance Reports Electronic System Design Industry Posts $5.1 Billion in Revenue in Q1 2025
07/16/2025 | SEMIElectronic System Design (ESD) industry revenue increased 12.8% to $5,098.3 million in the first quarter of 2025 from the $4,521.6 million registered in the first quarter of 2024, the ESD Alliance, a SEMI Technology Community, announced in its latest Electronic Design Market Data (EDMD) report.
Beyond Design: Refining Design Constraints
07/17/2025 | Barry Olney -- Column: Beyond DesignBefore starting any project, it is crucial to develop a thorough plan that encompasses all essential requirements. This ensures that the final product not only aligns with the design concept but is also manufacturable, reliable, and meets performance expectations. High-speed PCB design requires us to not only push technological boundaries but also consider various factors related to higher frequencies, faster transition times, and increased bandwidths during the design process.
Prague PEDC: Call for Abstracts Deadline July 31
07/16/2025 | Pan-European Electronics Design Conference (PEDC)The second Pan-European Electronics Design Conference (PEDC) will take place Jan. 21-22, 2026, in Prague, Czech Republic. The call for abstracts deadline is July 31. Organized jointly by the German Electronics Design and Manufacturing Association (FED) and the Global Electronics Association PEDC serves as a European platform for knowledge exchange, networking, and innovation in electronics design and development.
The Pulse: Design Constraints for the Next Generation
07/16/2025 | Martyn Gaudion -- Column: The PulseIn Europe, where engineering careers were once seen as unpopular and lacking street credibility, we have been witnessing a turnaround in the past few years. The industry is now welcoming a new cohort of designers and engineers as people are showing a newfound interest in the profession.