-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueProper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC: New EPA Proposal for “High Priority” Chemicals
September 10, 2019 | Kelly Scanlon, IPCEstimated reading time: 1 minute
The U.S. Environmental Protection Agency (EPA) proposes to designate 20 chemical substances as High-Priority Substances for upcoming risk evaluations. Several of the proposed chemicals are relevant to the manufacture or production of electronics: phthalates, flame retardants, and formaldehyde. The EPA is asking for comments on the proposed designations by November 21, 2019 and IPC will work with you to coordinate comments from the electronics industry and to represent the electronics industry in briefings with members of the TSCA office in Washington, D.C.
The table below lists the proposed candidates for High-Priority Substances. Highlighted text indicates that the EPA has identified uses that may be relevant to the electronics sector. If your company manufactures (including imports), processes, distributes, uses, or disposes of any of these chemical substances, then you will want to consider providing information regarding the chemical’s conditions of use. The EPA will use this information to determine whether the proposed designation as a High-Priority Substance is appropriate.
Please consider the following questions when determining whether to prepare comments to the EPA in conjunction with IPC:
- Did the EPA accurately identify this chemical substance’s use based on your knowledge of electronics manufacturing and production processes?
- What function does the chemical perform in the process or the product?
- What is the chemical’s criticality to the process and the product?
- How would you describe the scenario of use for the chemical substance including potential human or environmental exposure?
The proposed designation of the chemical substances as a High-Priority Substance is not a finding of unreasonable risk, rather this designation will initiate a risk evaluation for the chemical substance. The risk evaluation will determine whether the chemical presents an unreasonable risk to health or the environment under the conditions of use. Risk evaluations will inform risk management actions that impose restrictions on the chemical. We will have opportunities to engage with the EPA at several points during any future risk evaluations, but early engagement and frequent knowledge-sharing with the policy makers will enable development of policies that accurately reflect the uses of these chemicals.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Tigo Energy Initiates ‘Made in the USA’ Manufacturing Partnership With EG4 Electronics Share
08/27/2025 | BUSINESS WIRETigo Energy, Inc announced a manufacturing and marketing partnership with EG4 Electronics to produce Tigo optimized inverters and Module Level Power Electronics (MLPE) together with EG4 solar inverters in the United States of America.
North American EMS Industry Shipments Down 4.1% in July
08/27/2025 | Global Electronics AssociationThe Global Electronics Association announced today the July 2025 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.23.
Coming Soon: The Advanced Electronics Packaging Digest
08/27/2025 | Marcy LaRont, I-Connect007The upcoming Advanced Electronics Packaging Digest is a curated, condensed monthly publication designed to keep you informed and engaged with the fast-moving world of advanced electronics packaging (AEP). In our inaugural September issue, we will begin at the foundation with an in-depth interview featuring Matt Kelly, CTO of the Global Electronics Association. Kelly and his Technology Solutions Team approach advanced packaging from a holistic systems perspective.
SMTA Elects New Board Members
08/27/2025 | SMTAThe SMTA is pleased to announce its election results for the Global Board of Directors for the term beginning October 19, 2025. Elizabeth Benedetto, HP Inc.; Pratish Patel, Electronic Interconnect; and Sutharshan Suppiramaniam, SMT Elite Corporation, have been newly elected to the Board of Directors for the term 2025-2028.
Indium Expert to Present on AI Thermal Challenges at INEMI Forum on Complex Integrated Electronics
08/26/2025 | Indium CorporationIndium Corporation Assistant Product Manager Foo Siang Hooi will deliver a technical presentation on addressing thermal challenges in AI and high-performance computing (HPC) with metal-based thermal interface materials (TIMs) at the International Electronics Manufacturing Initiative (INEMI) Forum on Complex Integrated Electronics, to be held September 17-18 in Penang, Malaysia.