Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
Project MARCH Students’ Exoskeleton Helps Paraplegics Walk Again
April 10, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
When I was in college, I didn’t think much about helping make the world a better place; I just focused on making it to graduation. But some students from Delft University of Technology have found a way to do both. Project MARCH is made up of student volunteers who design and build futuristic exoskeletons that can help paraplegics walk. The students do most of the work themselves, including designing the various PCBs.
I saw their latest exoskeleton up close when Project MARCH exhibited at AltiumLive in Munich, and I had to find out more about this program. Delft Students Martijn van der Marel and Roy Arriens sat down with me to discuss their work on the exoskeleton, including their PCB design experience, and whether they plan to pursue PCB design as a career.
Andy Shaughnessy: Can you tell us a little bit about Project MARCH and this exoskeleton?
Martijn van der Marel: We are a student team from Delft University of Technology, which is one of the biggest technological universities in the Netherlands. We volunteered for a year to build this exoskeleton. With the exoskeleton, we help paraplegics walk again. Each year, we participate in a competition against other exoskeletons to improve the technology and see how far we’ve come.
Shaughnessy: The exoskeleton is pretty impressive. Are you all engineering students?
van der Marel: All students have a technical background, but within the team some of the students are in management and PR, but most of the students are in engineering roles.
Shaughnessy: How did this idea come about?
van der Marel: It started four years ago. Some other group initialized this exoskeleton project, and there were enough enthusiastic students who wanted to dedicate a year to building this exoskeleton. After that year, they continued their studies and recruited a new team of students to make an improved version. That has continued to this year.
Shaughnessy: Did you have to do your own fundraising to find the money necessary for this?
van der Marel: We find sponsors each year to do our own funding because we are self-dependent. We have dedicated people who attend events, find partners, and raise enough money to build an exoskeleton each year.
To read this entire article, which appeared in the March 2019 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Designing for Cost to Manufacture
11/21/2024 | Marcy LaRont, I-Connect007ICAPE's Richard Koensgen, a seasoned field application engineer with a rich background in PCB technology, shares his journey of working with customers and manufacturers through the intricacies of circuit board development and emphasizes the importance of early-stage collaboration with PCB designers. With a focus on tackling the most challenging aspects of PCB design and manufacturing, he discusses everything from layout considerations to the thermal challenges of today's technology when it comes to designing for cost.
OSI Systems Receives $11M Order for Electronic Assemblies
11/21/2024 | BUSINESS WIREOSI Systems, Inc announced that its Optoelectronics and Manufacturing division has received an order for approximately $11 million to provide critical electronic sub-assemblies for a leading-edge healthcare original equipment manufacturer (OEM), known for innovative and specialized medical solutions.
CHIPS for America Announces Up to $300M in Funding to Boost U.S. Semiconductor Packaging
11/21/2024 | U.S. Chamber of CommerceThe Biden-Harris Administration announced that the U.S. Department of Commerce (DOC) is entering negotiations to invest up to $300 million in advanced packaging research projects in Georgia, California, and Arizona to accelerate the development of cutting-edge technologies essential to the semiconductor industry.
NTT, Olympus Joint Demonstration Shows IOWN APN's Low-latency Capability
11/21/2024 | JCN NewswireNTT Corporation and Olympus Corporation announced that, following the start of their joint experiment in March of the world’s first cloud endoscope system which processes endoscopic videos on the cloud, they jointly established a cloud endoscopy system utilizing the IOWN APN technology.
Hon Hai Joins OpenUSD Alliance to Promote Standardized and Open Source Universal Scenario Description (USD) Technology
11/21/2024 | Hon Hai Technology GroupHon Hai Technology Group , the world’s largest technology manufacturing and service provider, announced that it has joined the Alliance for OpenUSD (AOUSD ) to support the construction of a 3D ecosystem and promote Cooperation among various industries around the world promotes the standardization of Universal Scene Description (USD ).