-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueCreating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Estimated reading time: 2 minutes

The Shaughnessy Report: The Designers Council Is Not Resting on Its Laurels
There was a time when PCB designers were the odd man out. They’re still a little odd, actually, but that’s another story. In the 1970s and ‘80s, unless you worked in a hotbed of high-tech like Silicon Valley, you may not have known too many other PCB designers.
That’s what happens when you work in a career that isn’t its own industry. And it was usually one or two designers working with an office full of EEs, none of whom understood exactly what you did anyway.
Back then, it was easy for a designer to feel isolated.
But the IPC Designers Council has done quite a bit to erase that feeling of being out of touch. Founded in 1992, the Designers Council is a group created “by designers, for designers” with over 1,000 members and 33 chapters around the globe. The DC offers networking opportunities, technical education, and certification such as the certified interconnect designer program (CID and CID+).
There is one important distinction about the DC. Unlike IPC membership, which is awarded only to companies, DC members are all individuals. There is no cost to join the Designers Council.
One of the biggest benefits of being involved with the DC is networking; you never know who you’re going to run into at a meeting. Some of the monthly “lunch-and-learn” chapter meetings draw a crowd of PCB designers and technologists—the Orange County and San Diego chapters routinely boast 50 or more attendees—who listen to guest presenters discuss some of the problems that designers face every day. If you live near a Designers Council chapter, make it a point to attend the next meeting. There’s a small fee to cover the cost of lunch, but you might learn something that helps you design your next board.
No, the DC isn’t perfect. After all, it’s made up of PCB designers! I’m kidding. In fact, bashing the Designers Council is almost a sport for some designers. But if you want to affect any sort of change, don’t just talk smack about the group; get involved! And if you’re not located near a DC chapter, why not start your own chapter? Our new columnist Stephen Chavez is a Designers Council Executive Board member, and he’d be happy to help you launch a chapter in your area.
To read this entire column, which appeared in the December 2018 issue of Design007 Magazine, click here.
More Columns from The Shaughnessy Report
The Shaughnessy Report: Solving the Data Package PuzzleThe Shaughnessy Report: Always With the Negative Waves
The Shaughnessy Report: Breaking Down the Language Barrier
The Shaughnessy Report: Back to the Future
The Shaughnessy Report: The Designer of Tomorrow
The Shaughnessy Report: A Stack of Advanced Packaging Info
The Shaughnessy Report: A Handy Look at Rules of Thumb
The Shaughnessy Report: Are You Partial to Partial HDI?