RTX's Collins Aerospace Initiates Powertrain Testing for Clean Aviation SWITCH Project at the Grid
March 18, 2026 | RTXEstimated reading time: 2 minutes
Collins Aerospace has begun initial testing of the electric motor drive systems for the European Union's Clean Aviation SWITCH project, a key step towards demonstrating the hybrid-electric technology on a full-scale Pratt & Whitney GTF™ engine. Integrated lab tests of the hybrid-electric powertrain subsystem, including motor generators, controllers and power distribution systems, are taking place at "The Grid," Collins' advanced electric power systems lab in Rockford, Illinois. Collins Aerospace and Pratt & Whitney are RTX (NYSE: RTX) businesses.
The SWITCH project is focused on demonstrating the potential of hybrid-electric technologies to optimize engine efficiency across different phases of flight for future short- and medium-range aircraft. Key subsystems validated at The Grid, including two megawatt-class motor generators, will be integrated within a hybrid-electric Pratt & Whitney GTF engine demonstrator as part of the next phase of testing.
"The start of powertrain subsystem testing is a key step towards demonstrating the potential of applying more electric systems to future commercial aircraft," said Kristin Smith, vice president, Electric Power Systems at Collins Aerospace. "Hybrid-electric technology has the potential to transform aviation by enabling greater fuel efficiency across multiple future platforms, including next generation single-aisle aircraft."
The SWITCH powertrain incorporates multiple key components developed at world-class research and development facilities across Europe. Collins Aerospace designed and produced megawatt-class electric motor and controllers at its Solihull, UK facility, while power distribution components including a solid-state power controller and power distribution panel were designed in Nördlingen, Germany. The high voltage electrical wiring interconnection system developed by GKN Aerospace was built in Papendrecht, Netherlands.
SWITCH is a collaborative effort involving MTU Aero Engines AG, Pratt & Whitney, Collins Aerospace, GKN Aerospace, Airbus and several European research institutions. Collins Aerospace is also engaged in multiple ongoing Clean Aviation projects targeted at enabling hybrid-electric propulsion and more electric aircraft architectures across regional and short- and medium- range platforms.
Funded by the European Union under GA no. 101102006 — SWITCH. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or Clean Aviation. Neither the European Union nor the granting authority can be held responsible for them.
Subscribe
Stay ahead of the technologies shaping the future of electronics with our latest newsletter, Advanced Electronics Packaging Digest. Get expert insights on advanced packaging, materials, and system-level innovation, delivered straight to your inbox.
Subscribe now to stay informed, competitive, and connected.
Suggested Items
Rethinking Reinforcement Materials for Advanced Packaging
05/14/2026 | Ivana Ivanovic, Flexiramics B.V.Materials that once quietly supported the industry are now becoming limiting factors. The electronics industry is experiencing unprecedented pressure as RF systems push into mmWave frequencies, high-speed digital architectures advance into their next performance generation, and power densities climb across automotive, telecom, aerospace, and computing. Reinforcement materials, long treated as a background detail in laminate design, are suddenly at the centre of performance, reliability, and supply‑chain discussions.
Below the Surface: Active Component and Module Submounts—The Architecture Behind Performance
05/14/2026 | Chandra Gupta -- Column: Below the SurfaceIf you were to peel back the layers of a modern electronic system, such as a satellite transceiver, a LiDAR module, or a 5G base station, you would not immediately notice a specific component doing some of the most important work. It doesn’t amplify signals, emit light, or process data, yet without it, none of those functions would be stable, reliable, or scalable. That component is the active device submount.
PTC Onshape Introduces Direct Altium Integration to Streamline ECAD-MCAD Collaboration
05/12/2026 | PRNewswirePTC announced a new integration between its cloud-native Onshape® computer‑aided design (CAD) and product data management (PDM) platform and Altium.
TTCI Renews ISO 9001:2015 Certification, Expands Scope to Include X-ray and CT Inspection Services
05/12/2026 | TTCIThe Test Connection, Inc. has successfully renewed its ISO 9001:2015 certification for Test Development and Test Services, with an expanded scope that now includes its X-ray and computed tomography (CT) inspection capabilities.
Delta Electronics Thailand Named to Dow Jones Best-in-Class Indices for Fifth Straight Year
05/11/2026 | Delta ElectronicsDelta Electronics (Thailand) Public Company Limited, a global leader in power management and smart green solutions has been included in the Dow Jones Best-in-Class Indices (DJ BIC, formerly DJSI) for the fifth consecutive year since 2021.