-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLearning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
The Designer of the Future
Our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
AT&S Sets New Standards in the Recycling of Copper and Chemicals
March 25, 2025 | AT&SEstimated reading time: 1 minute

AT&S has been working for years to reduce the ecological footprint of its production sites worldwide with a comprehensive sustainability strategy and considerable investments. The technical upgrading of the wastewater and waste treatment plants at the sites is now bringing considerable success: in the financial year 2024/25 alone, 268 tons of copper, 170 kilograms of gold, 35 kilograms of palladium, 16 kilograms of silver, 284,000 liters of iron(III) chloride and 984,000 liters of hydrochloric acid have been recycled so far globally. This also reduces the amount of wastewater sludge, which would be expensive and time-consuming to dispose of. In addition to the recycling of metals, it is possible to recover up to 1.5 million m3 of water per year using water recycling plants. These figures will continue to rise in the coming years.
“As part of our comprehensive sustainability strategy, we are constantly analyzing where there is further potential for improvements in energy and raw material efficiency. With our outstanding engineers, we then independently develop tailor-made solutions, which we first test at individual sites and then roll out globally. The treatment plants for metals, chemicals and water that we enhance along these lines show that we are really on the right path here. In the coming years, our production will become even greener,” says Marina Hornasek-Metzl, VP Corporate ESG and Quality at AT&S.
84 tanker trucks and 6,700 kilometers of cable saved
By developing and using state-of-the-art recycling technology, AT&S is not only improving its own ecological footprint and cost accounting. If fewer raw materials have to be purchased through efficient reprocessing, CO2 emissions and energy consumption for the production and transportation of resource purchases are also reduced. By reusing ferric chloride and hydrochloric acid alone, long delivery trips of 84 tankers full of chemicals with a capacity of 15,000 liters each could be avoided. The saved copper purchases would be sufficient to produce a 6,700 kilometer long cable with a cross section of 3 x 1.5 millimeters. AT&S thus achieves a positive sustainability effect along the entire supply chain and can play an active role in shaping a green, livable future worldwide.
Suggested Items
Lockheed Martin's AN/TPQ-53 Radar Strengthens U.S. Northern Command's Mission with Cutting-Edge Open Architecture Software
03/19/2025 | Lockheed MartinLockheed Martin has successfully integrated its AN/TPQ-53 multi-mission radar (MMR) with the Joint Task Force – Southern Border (JTF-SB) command and control systems in an operational environment, supporting U.S. Northern Command's (USNORTHCOM) southern border mission.
Insulectro Technology Village to Feature 35 Powerchats at IPC APEX EXPO 2025
03/11/2025 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, will present its popular and successful 13.5-minute PowerChats™ during this year’s IPC APEX EXPO at the Anaheim Convention Center, March 18-20, 2025.
AT&S Opens New Sales Office in Seoul
03/07/2025 | AT&SAT&S, a leading manufacturer of high-end printed circuit boards and IC substrates, is demonstrating its long-term commitment to Korea by opening a new sales office in Seoul. The office will serve as a central hub for regional customers and enable closer collaboration with partners.
Recruiting the Next Generation of PCB Designers at Garmin
03/06/2025 | Andy Shaughnessy, I-Connect007Laura Beth (LB) Yates, PCB design engineering manager at Garmin, discusses the company's innovative approach to recruiting the next generation of PCB designers. As she points out, the best part of her job is “going to work every day with my friends and making cool stuff.”
Don’t Rush: Get ‘Acclimated’ With Each Level of SI
02/27/2025 | Andy Shaughnessy, I-Connect007During DesignCon, I met with Al Neves, the founder of Wild River Technology, and a serious fly fisherman as well. As Al explains, some engineers are getting ahead of themselves by rushing to take on complex SI challenges before they’ve mastered their foundational knowledge. Like climbers on Mount Everest, these engineers need to spend more time getting “acclimated” at base camp before heading for the summit.