The Shaughnessy Report: Always With the Negative Waves
Connect the Dots: Stop Killing Your Yield—The Hidden Cost of Design Oversights
Global PCB Connections: A Field Engineer’s Perspective on the Top 10 Trends to Watch
Finding and Training the Next Design Engineers
March 6, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
There are a lot of job openings for PCB design engineers, and not enough young people in the pipeline to fill these jobs. How are we going to attract this next generation of design engineers to this industry, and what’s the best course of action for continuous training of these EEs?
I asked Bill Hargin, founder and “director of everything” at Z-zero, to share his thoughts continuous training and what the future may hold for design engineers of the future. As a signal integrity engineer and founder of his stackup software company, Bill has a fairly circumspect view of the industry, and he’s done his share of hiring. He’s also slightly off-grid, which often comes in handy in this evolving field.
Andy Shaughnessy: What advice regarding training and education would you give a young electrical engineer right out of college who wants to start a career as a PCB design engineer?
Bill Hargin: I think most companies have required and optional training opportunities, so leaning into that is a good start. My first job out of college was at Boeing, and we had tons of training options. I was almost always taking some sort of after-work course. Beyond that, I think everyone working in electronic hardware design should be working through books specific to hardware design. If it’s important, someone has written a book about it.
Shaughnessy: What topics and disciplines would you recommend for them to study: SI, PI, RF, EMC, etc.?
Hargin: I don’t like to generalize by saying, “Everyone should do XYZ.” But if I had to make a firm recommendation, I’d start by developing a firm foundation in basic signal integrity. From there, you can branch off into any or all the other three you mentioned.
To read this entire conversation, which appeared in the February 2025 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Electronic System Design Industry Posts $4.9 Billion in Revenue in Q4 2024
04/15/2025 | SEMIElectronic System Design (ESD) industry revenue increased 11% to $4,927.3 million in the fourth quarter of 2024 from the $4440.9 million reported in the fourth quarter of 2023, the ESD Alliance, a SEMI Technology Community, announced in its latest Electronic Design Market Data (EDMD) report.
Würth Elektronik ICS at PCIM Europe 2025
04/14/2025 | Wurth ElektronikWürth Elektronik ICS will be exhibiting at PCIM in Nuremberg from 6 to 8 May 2025. The specialist for PCB connection solutions in the high-current sector and inventor of Powerelements will be focussing on power electronics at exhibition stand 337 in hall A6.
EDA Tools and RF Design Techniques
04/14/2025 | Andy Shaughnessy, Design007 MagazineHigh-speed PCB design is complex enough, but RF design can be a whole new ball game. RF designers have to contend with tuning and other ideas that traditional PCB designers don’t have to worry about, as well as crosstalk, parasitic capacitance, and material limitations. Most PCB design tool companies now offer RF design options, so designers no longer have to use pureplay RF design tools for anything but the most cutting-edge designs. Cadence Design Systems expanded its RF EDA offerings by acquiring the RF software company AWR a few years ago. We asked David Vye, product management director at Cadence, to share his thoughts on EDA software, RF design, and what new RF designers and engineers need to understand.
Avnet Technology Links STMicroelectronics’ STM32 Microcontrollers
04/11/2025 | AvnetDesign engineers who struggle with chip down design will now be able to quickly prototype and deploy their projects based on STM32 series of microcontrollers, specifically the STM32F7 and STM32N6 series.
The Key to First-pass Success in PCB Design
04/10/2025 | Gerry Partida, Summit InterconnectIn the dynamic world of PCB manufacturing, achieving first-pass success hinges on more than just cutting-edge equipment and skilled teams. At Summit Interconnect, we have seen countless successful launches of advanced HDI designs that can be traced directly to engagement between designers and fabricators early in the design phase. Unfortunately, collaboration in the PCB industry often begins only after problems arise—such as field failures, assembly fallout, or low fabrication yields. This reactive approach is the wrong starting point for collaboration.