Dan’s Biz Bookshelf: 'Hidden Potential: The Science of Achieving Greater Things'
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
It’s Only Common Sense: 20 Lessons in 20 Years—A Career in Common Sense
Happy Holden: How I Became an Engineer
February 11, 2025 | Marcy LaRont, PCB007 MagazineEstimated reading time: 1 minute
What drives someone to become an engineer, particularly a PCB engineer? For industry icon Happy Holden, it was growing up in a family that couldn’t afford a TV but that lived close to a library and a movie theater. It allowed a curious boy the time and space to entertain his interests in science fiction and take things apart to see how the world really worked. As we guide and mentor today’s and future generations, his counsel is definitely worth considering.
Marcy LaRont: Happy, you’ve been in the industry for more than 50 years. How did you become an engineer?
Happy Holden: In the simplest sense, it boils down to toys, time, and money. I wanted toys to play with, my family did not have much money, and I had a lot of time on my hands. Neither of my parents were scientists or engineers. My father was a dairy farmer in Wisconsin and attending UW-Whitewater on the GI Bill. My mother was a farmer’s wife, but worked as a chemist on the Manhattan Project. She had also been an AAU swim champion, so she appreciated sportsmanship and hard work.
When I was young, we didn’t have a TV, so I was left to my own devices to entertain myself. I would often build my toys as the store versions were too expensive. Even for model airplanes, the plastic kits cost too much, so I bought inexpensive balsa wood and paper plane kits which took a lot of time and skill to build. With rubber bands, they could actually fly. Of course, I added a JetEx miniature solid fuel rocket motor to give them power.
We did have a radio, and I enjoyed listening to those programs. I was a builder from my earliest days, and I eventually built a radio receiver. I was someone who wanted to know how things worked. I enjoyed taking things apart and putting them back together.
Read this entire article, which appeared in the January 2025 issue of PCB007 Magazine.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Target Condition: Floor Planning Without a Floor
08/27/2025 | Kelly Dack -- Column: Target ConditionBy a show of hands, how many PCB designers have been asked to start a layout without a board outline, keep-out zones, or even height constraints? How many have had to work within a specific enclosure before the schematic was finalized? If this sounds familiar, you're not alone. Starting a PCB layout without critical constraints is like hiring an interior designer to buy furniture and carpet for a house you haven’t even purchased yet, or, even worse, trying to fit four bedrooms' worth of furniture in a one-room cabin.
Meet the Round 1 Winners of the Bright Manufacturing Student Challenge 2025
08/20/2025 | Tara Dunn, SMTAThe Bright Manufacturing Student Challenge is an opportunity for student teams to design and develop innovative solutions for real-world electronics manufacturing problems. The eight-week competition, sponsored by the Electronics Manufacturing & Assembly Collaborative (EMAC) through electronicsworkforce.com, allows students to showcase their technical skills, creativity, and problem-solving abilities.
Technica Demo Days Event Proves to Be Beneficial to Customers
08/18/2025 | Technica USATechnica USA’s Demo Days Event, took place August 13–14 at the company’s Demo Center in San Jose, California. The event featured live demonstrations and presentations from key supply partners ESSEMTEC, INOVAXE, and PARMI showcasing the latest innovations in SMT manufacturing and automation technology.
Hall of Fame Spotlight Series: Highlighting Jerry Siegmund
08/15/2025 | Dan Feinberg, I-Connect007The Raymond E. Pritchard Hall of Fame (HOF) Award has been awarded to those who have contributed significantly to the Global Electronics Association (formerly known as IPC) and our industry. Though many early HOF members have passed away and are unknown to today’s membership, their contributions still resonate. This special series on Hall of Fame members provides a reminder of who was honored and why.
Survey Says Reshoring is a TCO Equation
08/13/2025 | Nolan Johnson, SMT007 MagazineHarry Moser, founder of the Reshoring Initiative, and Kathy Nunnally of Regions Recruiting partnered to survey contract manufacturers and OEMs earlier this year, querying them about their offshoring beliefs and practices. They found that while offshoring, tariffs, trade balances, and the like, are important to a company’s bottom line, there’s a larger and more extensive issue: workforce. In this interview, they detail the results of that survey and what they believe can and should be done to fix this long-standing issue.