-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLearning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
The Designer of the Future
Our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
AT&S CEO Function to Be Newly Advertised
September 30, 2024 | AT&SEstimated reading time: 1 minute

Following the stepping down of Andreas Gerstenmayer from his position as CEO of the Austrian technology company AT&S on Monday due to personal reasons, AT&S is launching a CEO search. In the coming months, an internal or external candidate is to be found to succeed Andreas Gerstenmayer who has been CEO of AT&S since February 2010.
“Under Andreas Gerstenmayer’s leadership, AT&S has succeeded in developing into a global technology leader in microelectronics over the past one and a half decades,” said the AT&S Supervisory Board in recognition of Gerstenmayer’s work. “During this time, AT&S has not only embarked on a successful course of growth, but has also worked with the most innovative companies in the global electronics industry and gained major technology companies as customers. The members of the Supervisory Board, who wish Andreas Gerstenmayer all the best for the future, would like to express their sincere thanks for this achievements.”
“I have managed AT&S for more than 14 years, experienced the ups and downs and initiated the growth phase. It is now time to place the management of the company in new hands,” says Andreas Gerstenmayer. “AT&S is well prepared for the future challenges in a difficult market environment for the entire technology industry, so it is a good time for the handover.”
Suggested Items
AT&S Sets New Standards in the Recycling of Copper and Chemicals
03/25/2025 | AT&SAT&S has been working for years to reduce the ecological footprint of its production sites worldwide with a comprehensive sustainability strategy and considerable investments.
Lockheed Martin's AN/TPQ-53 Radar Strengthens U.S. Northern Command's Mission with Cutting-Edge Open Architecture Software
03/19/2025 | Lockheed MartinLockheed Martin has successfully integrated its AN/TPQ-53 multi-mission radar (MMR) with the Joint Task Force – Southern Border (JTF-SB) command and control systems in an operational environment, supporting U.S. Northern Command's (USNORTHCOM) southern border mission.
Insulectro Technology Village to Feature 35 Powerchats at IPC APEX EXPO 2025
03/11/2025 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, will present its popular and successful 13.5-minute PowerChats™ during this year’s IPC APEX EXPO at the Anaheim Convention Center, March 18-20, 2025.
AT&S Opens New Sales Office in Seoul
03/07/2025 | AT&SAT&S, a leading manufacturer of high-end printed circuit boards and IC substrates, is demonstrating its long-term commitment to Korea by opening a new sales office in Seoul. The office will serve as a central hub for regional customers and enable closer collaboration with partners.
Recruiting the Next Generation of PCB Designers at Garmin
03/06/2025 | Andy Shaughnessy, I-Connect007Laura Beth (LB) Yates, PCB design engineering manager at Garmin, discusses the company's innovative approach to recruiting the next generation of PCB designers. As she points out, the best part of her job is “going to work every day with my friends and making cool stuff.”