Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
3D Electronic Devices With Additive Manufacturing
November 29, 2022 | Shavi Spinzi, Nano DimensionEstimated reading time: 1 minute
Imagine fabricating PCBs without the hassle of drilled vias and metal plating. Imagine PCBs with near-perfect registration. If we take it to the next stage, imagine drawing electronics in 3D space.
There is a way to do all this with additively manufactured electronics (AME). We just need to start to think in 3D. This will allow us to abandon the 2D limitations that we have become so used to and expand our horizons so that we can climb to higher levels of performance.
In this article, I will explore the two fundamental capabilities that are the cornerstones for drawing electronics in 3D space, which is where AME technology and 3D design capabilities converge.
The First Cornerstone of AME: Isolation and Conductive Materials
More than a decade ago, we saw the rise of printed electronics (PE), which is printing of conductive traces on a predefined substrate. The substrate is fixed, can be planar or a 3D shape and the printing process—either inkjet, aerosol jetting, or any other method—places the conductor on top of it.
AME differs from PE because it uses more than one material. The simplest configuration for AME consists of two materials: one conductive and one isolation/dielectric. It has the potential to grow to more than two materials by adding combinations of different conductive and isolation materials as well as sacrificial materials to build channels and different complex structures.
Why Do We Need 3D PCB Structures?
The first stage of AME was to imitate traditional PCB 2D structures by building multilayer boards (MLB), plated through-holes (PTH), and microvias to prove that AME can replace "traditional" PCB processes. It certainly is doable, but it does not achieve the full potential and capabilities of 3D AME.
To read this entire article, which appeared in the November 2022 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Naprotek Appoints James Eisenhaure as Chief Financial Officer
07/07/2025 | Naprotek LLCNaprotek, LLC, a leading provider of mission-critical electronics technology solutions, today announced that James Eisenhaure has been appointed Chief Financial Officer, effective June 30. Eisenhaure has been serving as interim CFO since earlier this year and now formally steps into the role.
Yannick Green Joins Technica USA as Business Development/Account Manager for Northern California and Northern Nevada
07/07/2025 | Technica USATechnica USA is proud to announce that industry veteran Yannick Green has rejoined Team Technica as Business Development/Account Manager, supporting both supply partners and PCBA customers across Northern California and Northern Nevada.
I-Connect007’s Editor’s Choice: Five Must-Reads for the Week
07/04/2025 | Marcy LaRont, I-Connect007For our industry, we have seen several bullish market announcements over the past few weeks, including one this week by IDC on the massive growth in the global server market. We’re also closely watching global trade and nearshoring. One good example of successful nearshoring is Rehm Thermal Systems, which celebrates its 10th anniversary in Mexico and the official opening of its new building in Guadalajara.
Hon Hai Education Foundation Continues to Promote Quantum Education
07/04/2025 | FoxconnHon Hai Education Foundation has long been committed to promoting forward-looking technology education in Taiwan's high schools, and held the "High School Quantum Teacher Training Camp" in Tainan City on July 1.
Incap UK Achieves JOSCAR Zero Accreditation
07/04/2025 | IncapIncap Electronics UK has been accredited under JOSCAR Zero, a new sustainability-focused extension of the defence and aerospace sector’s supplier assurance system.