-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
AT&S Continues Strong Growth Course; Revenue Up 30% in 1H of 2021/22
November 5, 2021 | AT&SEstimated reading time: 5 minutes
AT&S reports a very positive revenue development in the first half of 2021/22.
Highlights:
- Half-year revenue increases by 30% to € 698 million (PY: € 538 million)
- Adjusted EBITDA at € 140 million, up 23% on the previous year
- Guidance for FY 21/22 increased: revenue growth of 21-23% (previously: 17-19%), adjusted EBITDA margin expected in the range of 21-23%
- Even more favourable impact of positive market environment and major projects in China and Malaysia on medium-term guidance
“Our performance in the first half of the year once again shows the positive dynamics in our sector and proves that we are consistently implementing the right strategy. Despite the volatility in some of our markets, we see a continued sharp increase in demand for our products. As we expand our capacity, we will be able to serve this demand even better in the future,” says CEO Andreas Gerstenmayer. “We expect our revenue to increase by 21 to 23 percent already this year. Our strategy is also proving successful in the medium term, so that we now anticipate revenue of € 3.5 billion in the financial year 2025/26 due to positive product mix developments,” Gerstenmayer comments on the further development.
Consolidated revenue rose by 29.7% to € 697.6 million in the first half of 2021/22 (PY: € 537.8 million). Adjusted for currency effects, the increase in consolidated revenue even amounted to 34.8%. As expected, the additional capacity in Chongqing to cover the growing demand for ABF substrates directly contributed to this growth. The broader application portfolio for mobile devices and the demand for module printed circuit boards also supported the growth trend. In the AIM segment, all three areas contributed to revenue growth, with the Industrial segment recording the sharpest increase. In the Automotive segment, the shortage of semiconductors has so far not led to any significant limitations on revenue, but the company will continue to monitor the development in this segment very closely.
EBITDA increased by 17.7% from € 111.2 million to € 130.9 million. While revenue growth had a positive impact on earnings, the start-up costs in Chongqing and higher material, transport and energy costs reduced earnings. In addition, AT&S significantly increased its research and development expenses, enabling the company to live up to its role as an innovation driver. Currency fluctuations of the US dollar and the Chinese renminbi had a negative impact of € 29.0 million on the earnings development. Without these fluctuations, growth would have amounted to 43.8%.
Adjusted for the start-up costs, EBITDA amounted to € 140.3 million (PY: € 113.8 million), which corresponds to an increase by 23.3%. Not including start-up costs and currency fluctuations, earnings would have increased by 48.8%.
The EBITDA margin amounted to 18.8% (EBITDA margin adjusted for start-up costs: 20.1%), falling short of the prior-year level of 20.7% (EBITDA margin adjusted for start-up costs: 21.2%). Depreciation and amortisation rose by € 22.0 million compared with the previous year and amounted to € 100.4 million due to additions to assets and technology upgrades. As a result, EBIT declined from € 32.8 million to € 30.5 million. The EBIT margin amounted to 4.4% (PY: 6.1%). Finance costs – net improved from € -13.8 million to € – 7.8 million due to lower negative exchange rate effects. Profit for the period increased by € 4.2 million from € 14.1 million to € 18.3 million primarily due to the improvement in finance costs – net.
The financial position was characterised by an increase in non-current assets at the end of the reporting period. Total assets rose to € 2,639.6 million, up 10.4% compared with 31 March 2021, as a result of additions to assets and technology upgrades. The significant increase in total assets led to a decline in the equity ratio by 0.5 percentage points although equity rose by 8.7%. The equity ratio thus amounted to 33.0% at the end of the first half-year and temporarily fell short of the medium-term target of 40.0% due to the extensive investment programme.
Cash and cash equivalents decreased to € 437.4 million (31 March 2021: € 552.9 million). In addition, AT&S has financial assets of € 16.4 million and unused credit lines of € 318 million to secure the financing of the future investment programme and short-term repayments.
Expansion of the Leoben site
In view of the ongoing boom in demand in the microelectronics sector and ever-new performance requirements for electronic systems, AT&S has decided to put an even stronger focus on research and development. On 15 October 2021, the company therefore announced investments in a new R&D centre for substrate and packaging solutions for the global semiconductor industry at its location in Leoben-Hinterberg. In addition, another technology upgrade of the production facilities will be implemented. The investments totalling € 500 million are planned up to 2025. The investment total includes previously communicated investments in a technology upgrade and the new AT&S office building.
Outlook 2021/22
AT&S will concentrate on the start-up of the new production capacities at plant III in Chongqing, continue to push ahead the investment project in Kulim, Malaysia, and implement technology upgrades at other locations in the current year.
The expectations for AT&S’s segments are currently as follows: the persisting strong demand for IC substrates also offers significant growth opportunities in the medium term. The 5G mobile communication standard will continue to drive growth in the area of Mobile Devices. A positive development is expected in the Automotive segment despite the semiconductor shortage. Driven by the roll-out of the 5G infrastructure, the Industrial segment will continue to see a positive development in the coming year. In the Medical segment, AT&S expects a positive development for the current financial year.
The company still plans to invest up to € 700 million in new capacities and technologies in the current financial year.
Due to the good development in the first half of the financial year and the continued strong dynamics of the IC substrate market, AT&S has slightly raised the forecast for the development of revenue and now expects revenue growth of 21 to 23% (previously: 17 to 19%). The adjusted EBITDA margin is expected to range between 21 and 23%, not including approximately € 50 million for the start-up of the new production capacity in Chongqing and in Kulim. The outlook is based on the assumption of a euro/US dollar exchange rate of 1.20 and that there are no unexpected effects of supply shortages, material cost and energy price fluctuations.
Outlook 2025/26
The expansion of production capacity in Chongqing, China, and in Kulim, Malaysia, is progressing more rapidly than previously anticipated despite the challenging global economic and health situation. Therefore, AT&S now assumes that revenue of € 3.5 billion will be generated in the financial year 2025/26 (previously: approx. € 3 billion). The EBITDA margin is still expected to range between 27 and 32%.
Suggested Items
PCBAA Wins Summit Silver Award from the American Society of Association Executives
07/18/2025 | PCBAAPCBAA was one of 38 associations that earned Silver Awards for outstanding contributions for an entry titled: Chips Don’t Float: More Printed Circuit Boards Must be Made in America.
July 2025 PCB007 Magazine: Sales—From Pitch to PO
07/18/2025 |Though all parts of a company are essential for holistic success, it is a foundational truth that a company lives and dies by its sales. If there are no sales, the company eventually ceases to exist, or as Henry Ford says, “Nothing happens until someone sells something.” In the July issue of PCB007 Magazine, we break down the sales stack and provide a guide to up your sales game.
Silicon Mountain Contract Services Enhances SMT Capabilities with New HELLER Reflow Oven
07/17/2025 | Silicon Mountain Contract ServicesSilicon Mountain Contract Services, a leading provider of custom electronics manufacturing solutions, is proud to announce a significant upgrade to its SMT production capability with the addition of a HELLER 2043 MK5 10‑zone reflow oven to its Nampa facility.
Technica USA Introduces Frank Silva as PCBA Representative for Southern CA and Southern NV Territories
07/16/2025 | Technica USATechnica USA is pleased to announce the partnership with veteran Frank Silva as our PCBA Sales Representative, supporting both supply partners and PCBA customers across Southern California and Southern Nevada.
Beyond Design: Refining Design Constraints
07/17/2025 | Barry Olney -- Column: Beyond DesignBefore starting any project, it is crucial to develop a thorough plan that encompasses all essential requirements. This ensures that the final product not only aligns with the design concept but is also manufacturable, reliable, and meets performance expectations. High-speed PCB design requires us to not only push technological boundaries but also consider various factors related to higher frequencies, faster transition times, and increased bandwidths during the design process.