Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

07/11/2025 | Andy Shaughnessy, Design007 Magazine
This week, we have quite a variety of news items and articles for you. News continues to stream out of Washington, D.C., with tariffs rearing their controversial head again. Because these tariffs are targeted at overseas copper manufacturers, this news has a direct effect on our industry.I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Digital Twin Concept in Copper Electroplating Process Performance

07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.
PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.

Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids

07/09/2025 | Happy Holden -- Column: Happy’s Tech Talk
When we consider via reliability, the major contributing factors are typically processing deviations. These can be subtle and not always visible. One particularly insightful column was by Mike Carano, “Causes of Plating Voids, Pre-electroless Copper,” where he outlined some of the possible causes of hole defects for both plated through-hole (PTH) and blind vias.

Trouble in Your Tank: Can You Drill the Perfect Hole?

07/07/2025 | Michael Carano -- Column: Trouble in Your Tank
In the movie “Friday Night Lights,” the head football coach (played by Billy Bob Thornton) addresses his high school football team on a hot day in August in West Texas. He asks his players one question: “Can you be perfect?” That is an interesting question, in football and the printed circuit board fabrication world, where being perfect is somewhat elusive. When it comes to mechanical drilling and via formation, can you drill the perfect hole time after time?

The Evolution of Picosecond Laser Drilling

06/19/2025 | Marcy LaRont, PCB007 Magazine
Is it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in