GlobalFoundries Accelerates GHG Reductions Commitments with Near Term Science-Based Target
April 23, 2025 | GlobalFoundriesEstimated reading time: 1 minute
GlobalFoundries announced it will accelerate its near-term greenhouse gas (GHG) emission reduction goals, enhancing the company’s commitment to sustainable operations and further supporting the sustainability leadership of partners including Apple and Infineon Technologies AG. GF’s revised targets will be set in line with Science Based Target Initiative (SBTi) standards.
GF is updating its Journey to Zero Carbon pledge with the accelerated commitment to reduce total GHG emissions by 42% from 2021 to 2030, up from the previous target of 25%, even as the company continues to expand its global semiconductor manufacturing capacity. GF is on track to meet this more ambitious 42% reduction goal, which will be accomplished through a comprehensive mix of energy efficiency improvements, state-of-the-art emissions controls, expanded use of alternative chemistries, and use of lower-carbon power across its fabs in the U.S., Germany and Singapore.
As part of this pledge, GF has committed to set its GHG emission reduction target in alignment with SBTi, widely considered the gold standard for science-based carbon reduction targets.
“Addressing today’s sustainability challenges is no small task, and GF has a strong track record of advancing responsible manufacturing and helping our customers achieve their sustainability goals,” said Niels Anderskouv, chief business officer and incoming president and chief operating officer at GF. “The essential chips we manufacture are in countless technologies and devices around the world. Our commitment to SBTi, and its vigilant framework for meaningful greenhouse gas emissions reductions, is both the right thing to do and another way for GF to be an environmentally responsible partner to our customers and communities.”
In partnering with Apple, GF is enhancing the sustainability of its semiconductor manufacturing operations and further reducing fluorinated GHG emissions, which have global warming potential thousands of times greater than that of CO2. GF has also been partnering with Infineon to set and meet more ambitious GHG reduction targets, in alignment with Infineon’s SBTi plans to address climate change across its entire value chain.
As GF works with SBTi on its near-term GHG emission reduction target, the company remains committed to its previously stated goals of achieving net-zero GHG emissions and 100% carbon-neutral power by 2050. Net-zero is a widely recognized global objective aimed at reducing emissions and supporting long-term environmental sustainability.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Elephantech Selected for NEDO’s Deep-Tech Startups Support Program in the Green Transformation field
09/09/2025 | ElephantechElephantech is pleased to announce its selection for the Demonstration development for Mass Production (DMP) phase of the 4th round of the Deep-Tech Startups Support Program in the Green Transformation field (GX) by NEDO, the New Energy and Industrial Technology Development Organization of Japan.
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste.
ASC Sunstone Circuits to Exhibit at AEMS 2025
09/09/2025 | American Standard CircuitsASC Sunstone Circuits will be exhibiting at AEMS 2025 (Anaheim Electronics and Manufacturing Show) to be held at the Anaheim Convention Center on September 24 and 25, 2025.
Electra’s ElectraJet EMJ110 Inkjet Soldermask– Now in Black & Blue at Sunrise Electronics
09/08/2025 | Electra Polymers LtdFollowing the successful deployment of Electra’s Green EMJ110 Inkjet Soldermask on KLA’s Orbotech Neos™ platform at Sunrise Electronics in Elk Grove Village, Illinois, production has now moved beyond green.
Building Electronics Excellence in India
09/08/2025 | Nolan Johnson, SMT007 MagazineOver two decades, Dave Bergman has helped steer the Global Electronics Association’s work in India, from a single training course to a thriving regional operation with deep government and industry ties. In this interview, Dave explains how the group went from partnering with IPCA to opening its own office in 2010, creating India’s first domestic electronics manufacturing standard, and securing funding for dozens of Indian companies to attend U.S. trade shows.