Dan’s Biz Bookshelf: The Ten Faces of Innovation
It’s Only Common Sense: Be the Solution, Not the Problem
American Made Advocacy: Long-time Challenges Confront a New Administration
IPC Hall of Fame Spotlight Series: Highlighting Denny Fritz
March 13, 2025 | Dan Feinberg, I-Connect007Estimated reading time: 2 minutes
Editor’s note: Dan Feinberg continues his series on the IPC Hall of Fame, spotlighting the achievements of past Hall of Fame members.
Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
This month, the Hall of Fame spotlight features Denny Fritz, a long-time friend and associate of mine.
Denny first got involved with IPC in 1978 while working with MacDermid. His first efforts were with the various board fabrication committees, something he believes helped lead to his eventual Hall of Fame award. He considers his patron saint, Dieter Bergman, to be the one who got Denny so involved, encouraged him when he did, and also supported his nomination for the Hall of Fame award.
As with so many HOF recipients, their involvement in IPC endeavors is difficult to fully convey, but I will try here to list out many of Denny’s innumerable IPC accomplishments.
Fabrication Standards Activities
SM-840 standard, 1978–1987
IPC Process Effects: IPC-740, chair 2005–2014
IPC Microvias: IPC D-33D, 1995–2004
IPC Buried Components (Resistors): D-55, 1997–2005
Surface finishes: IPC 455x, 1995-2012
Assembly Standards
IPC Component solderability J-002: Vice Chair, 1997–2020
Councils
October Project: Cooperative PCB Research, 1995-2003
Assembly and Joining Committee, 1997-2020
Roadmaps
IPC Technology Roadmap, Fabrication Section Editor, 1996-2015
iNEMI Roadmap, Bare Board Chapter Participant, 1998-2012
Books
Printed Circuit Handbook: Editor of the chapter on Embedded Components, 6th edition, 2012
Toward the advancement of global manufacturing, Denny also chaired the North American group of the JISSO International Council from 2006–14. The JISSO International Council (JIC) was an independent nonprofit organization in Japan governed by a steering committee to facilitate a strategic partnership among organizations interested in the total solution for interconnecting, assembling, packaging, mounting, and integrating system design standardization. According to an IPC paper presented at ECWC 10 at the IPC Printed Circuit Expo, as it was called at the time, JISSO is a made-up word that Japanese technologists created to stand for total system integration, akin to the “silicon to systems” phrase that IPC uses today. The JIC and its members were committed to fostering open competition in the development of products and services based on industry needs. IPC was one of the initial JISSO organizers, along with Japan Printed Circuit Association (JPCA), Japan Exchange and Teaching Association (JETA), and Joint Electronic Device Engineering Council (JEDEC). Denny’s early work with these groups was foundational in where IPC finds itself today in developing global manufacturing standards.
Denny is still involved with IPC and remains interested in and follows the industry’s technological advancement. Denny was considered for the Hall of Fame Award due to his involvement in the Assembly and Joining Committee, as well as his interest and involvement in all aspects of printed circuit board manufacturing and assembly technology. Thank you, IPC Hall of Fame member Denny Fritz, for your contributions to IPC and the industry at large.
This article appeared in the February 2025 issue of PCB007 Magazine.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/14/2025 | Nolan Johnson, I-Connect007Inside the industry, it feels like we’re getting ready for a big party holiday, and I’m feeling the whole Mardi Gras vibe. This weekend, IPC APEX EXPO kicks off with standards development committees and the Technical Conference before the Expo starts on March 18. We’ll be sneaking out of our network of evil lairs scattered around North America and convening at the I-Connect007 booth in the middle of the Anaheim Convention Center. Be sure to stop by and say hello.
IPC Asia’s Talent Development Program Opens Pathways to a More Qualified Workforce
03/14/2025 | Evelyn Cui, IPC AsiaIn Asia, the contradiction between the rapid development of the electronics manufacturing industry and the shortage of talent is particularly evident. The existing talent pool cannot fully meet the market's demand for highly skilled professionals. According to feedback from industry companies, there is an urgent need for professionals with knowledge of IPC standards and practical skills in electronics. However, the reality is that most academic courses are disconnected from the actual needs of the industry, leading to disappointing results when companies recruit from universities and schools.
Ventec International Group Announce Launch of VT-47LT IPC4101 /126 Prepreg for HDI
03/12/2025 | Ventec International GroupVentec International Group announce launch of VT-47LT IPC4101 / 126 Prepreg. Are Microvia Failures Plaguing Your HDI Any Layer Designs? High-density interconnect (HDI) designs are pushing the envelope - higher layer count HDI relies on complex microvia designs: skip vias, staggered microvias, and stacked microvias in sequential laminations.
IPC Releases Latest List of Standards and Revisions
03/12/2025 | IPCEach quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status. These are the latest releases for Q1 2025.
The Test Connection Inc. Promotes Melanie Rutkauskas to Director of Operations for The Training Connection, LLC
03/11/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is pleased to announce the promotion of Melanie Rutkauskas to Director of Operations for The Training Connection, LLC (TTC-LLC). With her extensive background in operations management, accounting, and customer relations, Melanie brings a wealth of experience and leadership to her new role.