-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
L-3 to Supply Electro-Optical and Infrared Designating Systems Under a U.S. FMS Contract
September 6, 2016 | L-3 CommunicationsEstimated reading time: 1 minute
L-3 Communications announced today that its Integrated Sensor Systems (ISS) sector within its Electronic Systems segment has been selected under a U.S. Foreign Military Sales (FMS) contract to provide eight WESCAM MX-10D electro-optical and infrared (EO/IR) designating turrets to a Middle Eastern nation’s Ministry of Defense.
L‐3’s MX‐10Ds will be used by the customer in support of counterterrorism operations from its newly acquired UH-60 Black Hawk helicopters. Turret deliveries to Sikorsky, the integrator for the program, began in June 2016 and will continue through February 2017.
“This is a key win in an important and emerging international market,” said Steve Kantor, president of L-3’s Electronic Systems business segment. “L-3 WESCAM has a well-established record of providing innovative technologies that give our customers the distinct advantage needed for their security operations.”
“We are proud to provide our end user with a powerful and affordable designating solution that will work in conjunction with legacy systems to deliver a unique and essential integrated EO/IR system,” added Paul Jennison, vice president of government sales and business development for L-3 WESCAM, a unit of L-3’s ISS sector.
L-3’s imaging systems range in size from 8 inches to 25 inches in diameter and provide high-resolution, stabilized full-motion intelligence in support of low-level tactical to high-altitude, ultra long-range persistent missions.
With fully active four-axis MX™-Series stabilization, the MX-10Ds are configured with a series of high-sensitivity, multi-spectral sensors that enable precision engagement from tactical ranges during daylight, low-light and nighttime missions. The sensors include a four field-of-view thermal imager, a high-definition daylight continuous zoom TV and a low-light continuous zoom TV, as well as advanced laser designator, rangefinder and illuminator technologies.
About L-3
Headquartered in New York City, L-3 employs approximately 38,000 people worldwide and is a leading provider of a broad range of communication and electronic systems and products used on military and commercial platforms. L-3 is also a prime contractor in aerospace systems. The company reported 2015 sales of $10.5 billion.
Suggested Items
TT Electronics Secures £20 Million in Aerospace and Defence Contracts as European Programmes Accelerate
06/06/2025 | TT ElectronicsTT Electronics has been awarded more than £20 million in new and renewed defence contracts, marking a major step forward in its contribution to Europe’s rapidly evolving defence landscape.
Elma Electronic Bolsters Quality Management Company-wide with Added AS9100:D and ISO9001:2015 Certifications
06/02/2025 | Elma ElectronicElma Electronic now includes AS9100:D and ISO 9001:2015 certifications at its Horsham, Pa. manufacturing facility, earning the company a multiple site accreditation designation.
See TopLine’s Next Gen Braided Solder Column Technology at SPACE TECH EXPO 2025
05/28/2025 | TopLineAerospace and Defense applications in demanding environments have a solution now in TopLine’s Braided Solder Columns, which can withstand the rigors of deep space cold and cryogenic environments.
ICEFlight to Accelerate Maturation of Cryogenic Technologies for Hydrogen-Powered Flight
05/27/2025 | GKN AerospaceGKN Aerospace is one of the project partners in ICEFlight (Innovative Cryogenic Electric Flight), a project aiming to contribute to the development of hydrogen-powered flight.
Vertical Aerospace Makes Aviation History with Piloted eVTOL Flight in Open Airspace
05/27/2025 | BUSINESS WIREVertical Aerospace, a global aerospace and technology company that is pioneering electric aviation, announced it has made European aviation history with the first-ever piloted wingborne flight of a winged electric vertical take-off and landing (eVTOL) aircraft in open airspace.