Dan's Biz Bookshelf: 'Apple in China: The Capture of the World’s Greatest Company'
The Chemical Connection: Experience and Wisdom Gained by Doing Business
It's Only Common Sense: Leveraging AI in Your Sales Strategy
Getting Our ‘Fil’ of Design Constraint Techniques
August 7, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Setting design constraints is one of the most critical parts of the PCB design process. The PCB designer must balance performance, manufacturability, and cost while addressing issues such as component function, signal integrity, thermal management, and EDA tool idiosyncrasies.
Filbert Arzola is a principal electrical engineer at Raytheon SAS and an instructor who teaches one of the few classes (that I know of) that focuses on setting design constraints. I asked Fil to share his thoughts on design constraints: the factors involved, the various trade-offs, and his best practices for optimizing constraints for your particular design. As Fil says, “Everything about a PCB is a constraint.”
What sort of pre-layout analysis should be performed before you begin setting constraints?
Filbert Arzola: When starting a new PCB board design, one must set up initial routing and clearance constraint settings to enable a good start to engineer your board design. However, one must first review and settle on the initial mechanical model that will house your board design. I highly advise every PCB board engineer to fully understand and confirm the mechanical aspects of the housing, including the outline, the amount and size of the mounting hole clearances, the type and size of the bolt and washer hardware, and most of all, if there are any 3D interferences. A nice DXF file that details all this information completes the electronic model to pre-analyze the mechanical aspect of the board design. One must understand why we constrain our designs and what doing so will give us in return. Having a solid, well-designed, and engineered mechanical model is a must to constrain a successful PCB model database.
To continue reading this interview, which originally appeared in the July 2025 issue of Design007 Magazine, click here.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Synopsys, GlobalFoundries Establish Pilot Program to Bring Chip Design and Manufacturing to University Classrooms
09/05/2025 | GlobalFoundriesSynopsys, Inc. and GlobalFoundries (GF) announced a new collaboration to launch an educational ‘chip design to tapeout’ program for universities worldwide.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/05/2025 | Andy Shaughnessy, I-Connect007It’s almost fall here in Atlanta, and that means that the temperature is finally dropping. And it quit raining! It’s been raining since March, and I’m so over it, as the social influencers say. Last night we grilled out on the deck, and it wasn’t hot, and we didn’t get rained on. Life is good. It was a busy week in the industry. In this installment of my must-reads, we say goodbye to Walt Custer, the man who made PCB data points interesting for the rest of us.
American Standard to Participate in European Microwave Week 2025
09/05/2025 | American Standard CircuitsAnaya Vardya, President, and CEO of American Standard Sunstone Circuits has announced that his company will once again be taking part in European Microwave Week, Europe’s premier RF, microwave, radar and wireless event, to be held from September 21-26, 2025 at Jaarbeurs in Utrecht, The Netherlands.
Kris Moyer Discusses His Emerging Design Technologies Class
09/04/2025 | Marcy LaRont, I-Connect007Kris Moyer, a design instructor for the Global Electronics Association, will be teaching his advanced PCB design class this fall. If you’re ready to level up your design education, you won’t want to miss this interview. The PCB Design for Emerging Design Technologies course is designed to provide the skills necessary to create PCB/PBA designs that require cutting-edge emerging design technologies and comply with all necessary IPC standards, including new standards being developed in this area.
Synopsys Announces Expanding AI Capabilities for its Leading EDA Solutions
09/04/2025 | SynopsysSynopsys announced expanding Synopsys.ai™ Copilot generative AI (GenAI) capabilities for its industry-leading semiconductor design solutions, enabling semiconductor engineering teams to accelerate development timelines, support significantly more complex designs, and increase engineering velocity amidst a workforce shortage.