Innovative Technology Advancements in Test: HATS² Technology and Its Impact on Reliability Testing
May 14, 2025 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
Ensuring the reliability of printed circuit boards (PCBs) has become increasingly difficult and critical, yet the development of advanced testing methodologies is essential to meeting industry demands and addressing persistent challenges. One significant innovation is the High Acceleration Thermal Shock (HATS²) test system, which transforms how reliability testing is conducted. After 40 years in the testing business at Microtek, Bob Neves is beginning a new journey with his company, Reliability Assessment Solutions Inc. (RAS). He has been instrumental in developing the HATS² test system, channeling his decades of expertise into what could be considered the perfect machine. Bob is working with Andrew Naisbitt, CEO of GEN3, to bring this powerful tool to market. In this interview, Bob and Andrew share the origin of this technology, its impact on the reliability testing landcape, and how it better addresses specific failures encountered with microvia structures during component attachment. They acknowledge that after testing the same way for 50 years, change in this industry is hard. But they believe the time for change is now. You’ll find out why in this compelling conversation.
Barry Matties: Bob, it’s always good to see you. You are a recipient of IPC’s Hall of Fame Award for your contributions to the industry over the years and have been involved in the test and measurement area for a long time. Now you have been essential in the development of some new technology. How did the development of the HATS² test system come about?
Bob Neves: In 2001, a need arose for a faster reliability test that cycled from cold to hot and would speed up the one-hour dual chamber run cycle. I received a patent and developed the first HATS tester, which cycled PCB board coupons from -55°C to +160°C. Twenty-four years ago, that was pretty novel because people were doing one-hour cycles in a dual chamber, and it took 42 days to do a thousand cycles. We were successful at compressing that down to about a week. Then some military projects went away, and it never really took off because it was a bit ahead of its time. A few years ago, the industry had a problem: Microvias failing during exposure to the high temperatures were associated with the components being attached to and replaced on the boards, but when they cooled down, they made a mechanical connection again. Even if you cycled at lower temperatures, they would always pass testing, get into the field, and have early-life failures.
To read the entire interview, which originally appeared in the May 2025 issue of SMT007 Magazine, click here.
Suggested Items
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
Bridging the Knowledge Gap in Test: A Conversation with Bert Horner
06/11/2025 | Barry Matties, I-Connect007Bert Horner is a seasoned industry veteran and co-creator of The Test Connection, Inc. (TTCI), a test and inspection company spanning over 45 years. In this candid conversation, Bert reflects on the challenges our industry faces with the retirement of career professionals and the subsequent loss of critical tribal knowledge. As he unveils The Training Connection’s innovative training initiatives, Bert emphasizes the importance of evolving educational programs that align with industry needs, particularly in design for test (DFT), and sheds light on strategies being implemented to foster the next generation of engineers.
IPC Hall of Fame Spotlight Series: Highlighting Bob Neves
06/11/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. This Hall of Fame spotlight features industry veteran Bob Neves, who joined IPC in 1986 and was inducted into the IPC Hall of Fame in 2007.
GEN3 Set to Host HATS²™ Technical Day at A.W. Technical Centre with Bob Neves
06/09/2025 | Gen3GEN3, a global leader in reliability testing and measurement solutions for the electronics industry, is excited to announce a dedicated HATS²™ Technical Day to be held at the A.W. Technical Centre in Farnborough, GEN3’s HQ. The event will showcase the HATS²™ (Highly Accelerated Thermal Shock) system with demos and presentations by Bob Neves, Chairman of RAS Inc. and creator of the HATS²™.
Rohde & Schwarz Satellite Industry Day 2025: Connecting the World with New Space and 5G NTN Technologies
05/27/2025 | Rohde & SchwarzAfter four successful online events with over 1000 participants, Rohde & Schwarz is hosting its fifth Satellite Industry Day on June 3, 2025, on-site at its Munich campus. Rohde & Schwarz test and measurement experts and partners from the industry will present topics from 5G Non-Terresterial Network (NTN) and satellite testing to monitoring and regulatory issues. During breaks participants can experience cutting-edge test and measurement solutions.