-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
RF PCB Design Tips and Tricks
May 8, 2025 | Cherie Litson, EPTAC MIT CID/CID+Estimated reading time: 1 minute

There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Here’s a quick summary of the common suggestions that I’ve learned from them and others over time:
- A schematic shows the “ideal” functionality of the RF circuit. When creating a schematic in the PCB layout, the “real” physics of the copper strips, dielectric material, and adjacent circuits and metal features create parasitic influences: resistance, inductance, and capacitance.
- It is the responsibility of the layout engineer to minimize the differences between the “ideal” and “real.”
- Electronic devices and systems operate at frequencies ranging from a few megahertz to several gigahertz. Finding the best method to control the parasitic influences requires only a few basic guidelines.
- Identify and understand the current loops in the circuit
- The shorter the loop, the lower the impedance and resistance ratios
- Use an uninterrupted ground plane as close as possible to the referenced signal
- Give each ground connection its own via as close as possible to the pad
To do this in a PCB, remember it is a 3D environment. Uninterrupted ground plane layers close to their signal, impedance calculations, material selection, copper thicknesses, trace thicknesses, shielding, and spacing become the tools to control the parasitic influences of the “real” circuit.
Methods for applying each of these tools in your PCB design are available for all designers. Then download a tool such as Saturn’s free PCB Toolkit and see how switching to different parameters in the “differential pairs/XTALK” tab will change the values of your target impedances. This will get you in the ballpark of creating a good RF design.
To continue reading this article, which originally appeared in the April 2025 issue of Design007 Magazine, click here.
Suggested Items
PCBA Market to Reach $147.5 Billion by 2035, Growing at a CAGR of 4.7% from 2025
06/27/2025 | PRNewswireThe Printed Circuit Board Assembly market is projected to reach $147.5 billion by 2035, up from an estimated $90.91 billion in 2025, growing at a steady CAGR of 4.7% during the forecast period.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Summit Interconnect Participates in PCBAA Annual Meeting to Advance U.S. Electronics Policy
06/26/2025 | Summit Interconnect, Inc.Summit Interconnect was proud to participate in the 2025 Annual Meeting of the Printed Circuit Board Association of America (PCBAA), held in Washington, D.C. this June.
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.