The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
Defense Speak Interpreted: Update on the Continuing Resolution and Budget Process for Defense
American Made Advocacy: Reshoring—About Trust, Not Just Geography
RF PCB Design Tips and Tricks
May 8, 2025 | Cherie Litson, EPTAC MIT CID/CID+Estimated reading time: 1 minute
There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Here’s a quick summary of the common suggestions that I’ve learned from them and others over time:
- A schematic shows the “ideal” functionality of the RF circuit. When creating a schematic in the PCB layout, the “real” physics of the copper strips, dielectric material, and adjacent circuits and metal features create parasitic influences: resistance, inductance, and capacitance.
- It is the responsibility of the layout engineer to minimize the differences between the “ideal” and “real.”
- Electronic devices and systems operate at frequencies ranging from a few megahertz to several gigahertz. Finding the best method to control the parasitic influences requires only a few basic guidelines.
- Identify and understand the current loops in the circuit
- The shorter the loop, the lower the impedance and resistance ratios
- Use an uninterrupted ground plane as close as possible to the referenced signal
- Give each ground connection its own via as close as possible to the pad
To do this in a PCB, remember it is a 3D environment. Uninterrupted ground plane layers close to their signal, impedance calculations, material selection, copper thicknesses, trace thicknesses, shielding, and spacing become the tools to control the parasitic influences of the “real” circuit.
Methods for applying each of these tools in your PCB design are available for all designers. Then download a tool such as Saturn’s free PCB Toolkit and see how switching to different parameters in the “differential pairs/XTALK” tab will change the values of your target impedances. This will get you in the ballpark of creating a good RF design.
To continue reading this article, which originally appeared in the April 2025 issue of Design007 Magazine, click here.
Share on:
Suggested Items
New Issue of Design007 Magazine: Are Your Data Packages Less Than Ideal?
05/09/2025 | I-Connect007 Editorial TeamWhy is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal data package for your design.
The Right Blend: Mixed Wireless Technologies
05/08/2025 | Kirsten Zima, Siemens EDAA common trend recently is to employ as many radios as possible on a single PCB. With the increase of wireless standards and the downscaling of PCB size, it can be difficult to know what the most critical design parameters are to focus on. In this article, we’ll discuss the most important considerations to make when designing with mixed wireless technologies, such as Bluetooth, GPS, and Wi-Fi, on a single PCB. These considerations include antennas, frequencies, FCC compliance, shielding, and layout with and without transition vias.
Navigating Global Manufacturing in an Era of Uncertainty
05/07/2025 | Philip Stoten, ScoopThe EMS industry faces unprecedented challenges as global trade tensions rise and tariff announcements create market uncertainty. In an overview of IPC Europe’s podcast, MADE IN EUROPE, industry experts from GPV and Zollner examine how these developments impact our businesses and customers, and what strategies will prevail in this new landscape.
Voices of the Industry: Alpha Circuit
05/06/2025 | Marcy LaRont, PCB007 MagazinePrashant Patel, founder and president of Alpha Circuit, takes a pragmatic approach to doing business: “Commerce always wins out,” he says. How will potential tariffs and shifts in the economy affect PCB manufacturing? Prashant offers sound advice.
AMI Achieves 52 Consecutive Weeks of First Pass Yield Rates Above 98.72%
05/06/2025 | Alternative Manufacturing, Inc.AMI, a leading provider of high-quality PCB assembly (PCBA) solutions, proudly announces the achievement of 52 consecutive weeks of first pass yields at test, maintaining an exceptional success rate of 98.72% or better. This remarkable accomplishment underscores the company's unwavering commitment to manufacturing excellence, quality assurance, and customer satisfaction.