-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
TESOLLO Unveils High-Performance Humanoid Robot Hand, DG-5F
February 7, 2025 | TESOLLOEstimated reading time: 1 minute

TESOLLO, a Korea-based specialist in robotic grippers, has launched its latest innovation, the Delto Gripper-5 Finger (DG-5F), further solidifying its competitive edge in the robotics market.
Set to go on sale in March, the DG-5F has already garnered significant attention at major exhibitions, including RoboWorld 2024, Korea’s largest robotics expo, and CES 2025, held this past January in the United States.
DG-5F boasts 20 degrees of freedom (DoF), with each of its five fingers independently operating with four joints, allowing for an exceptional level of dexterity, closely mimicking the human hand.
Measuring approximately 20㎝ in length comparable to an average adult male hand this ultra-lightweight 1.4㎏ robotic hand delivers an impressive gripping force of up to 7㎏.
A TESOLLO representative stated “The DG-5F is designed with a Direct Drive Type mechanism, simplifying robotic kinematics while minimizing backlash, ensuring high precision. Even users with basic robotics knowledge can easily operate this system.”
This new robotic hand is particularly noteworthy for its ability to fully automate industrial processes, setting a new standard for robotic end-effectors.
TESOLLO is dedicated to developing robotic end-effectors capable of replacing manual operations, and the Delto Gripper series embodies this mission. DG-5F, in particular, represents the pinnacle of TESOLLO’s engineering expertise in humanoid robotic hands.
One of the DG-5F’s standout features is its built-in gripping algorithm, which enables it to handle objects of various shapes and materials seamlessly. It also supports industrial communication protocols (Modbus RTU/TCP), making it highly practical and efficient for industrial applications.
Moreover, the DG-5F is 20–45% more cost-competitive than similar products on the market, attracting strong global interest.
Suggested Items
Cybernetix Ventures Raising $100M Fund as Robotics and Physical AI Enters Accelerated Growth Phase
06/03/2025 | CybernetixBoston-based Cybernetix Ventures, a leading US early-stage venture capital firm investing in robotics, automation and physical AI technology companies, announces its second fund. Leveraging its longstanding leadership in robotics, and unparalleled deep and wide network in robotics the firm is launching this fund to fuel the next generation of breakthrough solutions for industries where innovation matters most.
Tesollo Selected for NVIDIA Inception Program
06/02/2025 | TesolloRobotics and solutions development company Tesollo Inc. announced that it has been officially selected as a member of NVIDIA’s Inception Program.
VDMA Forecast 2025: German Robotics and Automation Faces 10% Revenue Drop Investment Restraint Shapes the Outlook
06/02/2025 | VDMAThe robotics and automation industry in Germany is expected to generate total sales of €14.5 billion in 2025. This is a drop of ten percent compared to the previous year.
E-tronix Announces Upcoming Webinar with ELMOTEC: Optimizing Soldering Quality and Efficiency with Robotic Automation
05/30/2025 | E-tronixE-tronix, a Stromberg Company, is excited to host an informative webinar presented by Raphael Luchs, CEO of ELMOTEC, titled "Optimize Soldering Quality and Efficiency with Robotic Automation," taking place on Wednesday, June 4, 2025 at 12:00 PM CDT.
Altus Supports Phoenix Systems in Advancing THT Assembly with Robotic Soldering
05/27/2025 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, has successfully supported Phoenix Systems UK Ltd in its investment in robotic soldering technology to further enhance its through-hole technology (THT) assembly processes.