SMTA UHDI Symposium 2025, Part 2: State of the Art
January 29, 2025 | Marcy LaRont, I-Connect007Estimated reading time: 7 minutes
The technical sessions concluded with the panel pictured above, “Bridging the Gap: Accelerating Ultra HDI Adoption Through Collaboration,” which featured (L-R) Gayle Towell of AIM Solder, Gerry Partida of Summit Interconnect, Stephen Chavez of Siemens, John Johnson of American Standard Circuits, and Paul Cooke of AGC Multi Material America. I loved the energy of a panel discussion, and this one was more animated than most.
Paul took the first question, “How will PCB design impact fabrication?” Since Paul was about to conduct a course “Boot Camp — How PCB Design Affects Fabrication” at DesignCon 2025, he said that he planned to use that opportunity to underscore the importance of talking to your fabricator so you don’t design something that will have lots of problems.
John chimed in, saying that we are in a time where we have a lot of young designers who need to be educated and get exposure to fabrication processes. Gerry pointed out that the failure of via structures has to do with thermal expansion, which designers don’t necessarily think about, and with the new materials that are so thin, there isn’t any thermal expansion, thus making that problem go away. He also noted that, especially with military work, you won’t always know exactly what you are building, so it’s important to ask specifically about their reliability requirements.
Boards used for aerospace products or in the air, which is an atmosphere where there will be moisture, will have much different reliability requirements than a bench product. Steph turned the question around and said he looks at it this way: “How does PCB fabrication impact my design?” Agreeing with a comment made by Paul about making sure you have more than a single source to fabricate your boards, Steph, speaking about supply chain sustainability, offered some advice he received from his mentors early in his career: “Make sure you design a board that can be built anywhere at any time.”
Gayle, whose first career was in education, took a different perspective. She raised the importance of changing the way we educate young designers and the need for our education system to collaborate actively with industry to help make this happen. To her point, an audience member asked, “When will we abandon the traditional way we educate about this?” He noted that we are in two different worlds at the symposium, talking about both PCB fabrication and PCB assembly. Why aren’t we bringing those worlds closer together and teaching them together as well?
More to a core problem we have with workforce development, Chrys pointed out that we aren’t teaching PCB fabrication and assembly at all. What ensued was one of the most animated discussions of the day, which gives me hope that PCB fabrication and assembly will find ways to become more engaged and involved with education programs that already exist but are more focused on semiconductors.
The day would not have been complete without some discussion on Moore’s Law, a topic I hear a lot about. While no one would say that Moore’s Law is dead, John Johson said that when it comes to UHDI, at least say that it is slowing way down.
The award for “word of the day” goes to Steph Chavez for his term “collabication,” with Gerry adding that with UHDI, collaboration is a must if you want to be successful in your design, and before you lay down your first trace.
It was an educational day; all of the presentations were well received, and we finishied up with a happy hour networking session. For the folks who had traveled to attend, dinner plans guaranteed a continuation of much important discourse.
Unfortunately, there were no OEMs in attendance this year, which is the group that needs to hear this information at least as much as the rest of us. But the discussion is far from over. I’m at DesignCon this week, and I look forward to IPC APEX EXPO in March for the immediate continuance of UHDI discourse. Stay tuned.
For more information on the SMTA UHDI symposium and the continuing dialogue around UHDI, I encourage you to reach out to Tara Dunn of SMTA for more information. We are also quickly approaching IPC APEX EXPO in March, which will spend a lot of time on UHDI and advanced packaging throughout their technical conference and special sessions. Be sure to check them out!
Page 2 of 2Suggested Items
Are Domestic Assemblers Ready for the Next Level of Electronics Miniaturization?
02/19/2025 | Chrys Shea, SHEA Engineering ServicesUHDI technology is more than another evolutionary level of miniaturization. It’s a fundamental change in how we create circuit boards, on a scale potentially as impactful as the transition from through-hole to surface mount was 40 years ago.
UHDI Fundamentals: UHDI Bleeding-edge Entertainment Applications, Part 2
02/06/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is revolutionizing bleeding-edge entertainment applications by enabling compact, high-performance devices that push the boundaries of immersion, interactivity, and realism. Part 2 focuses on how UHDI is advancing the entertainment industry, particularly gaming.
Happy’s Tech Talk #37: New Ultra HDI Materials
02/03/2025 | Happy Holden -- Column: Happy’s Tech TalkSome new materials have been introduced in the past year for ultra high density interconnect (UHDI), a convenient title for developing high density technologies. They have received labels like semiconductor-like PCBs (SLPs), redistribution layers (RDL), flip-chip ball grid array (FCBGA), and interposers. The early 2000s saw the creation of these organic substrates for flip-chip IC packaging. The initial construction was composed of a BT core with build-up layers of the Ajinomoto Build-up Film (ABF)
SMTA UHDI Symposium 2025, Part 1: Challenges and Solutions
01/28/2025 | Marcy LaRont, I-Connect007SMTA hosted its second annual Ultra High Density Interconnect Symposium, a conference on cutting-edge PCB technology, on Jan. 23, 2025, at the Peoria Sports Complex in Arizona. A highly pro-business state with a special affection for the tech sector, Arizona is home to the biggest Intel semiconductor fab in the United States and the new TSMC chip fab. With an intimate group of approximately 50 attendees, the SMTA event offered a great forum for learning, interactive discussion, and networking.
ACCM Launches CeleritasSF & CeleritasBU for Ultra-High-Speed PCBs
01/27/2025 | PRNewswireAdvanced Chip and Circuit Materials Inc. (ACCM), a US-based manufacturer of skew free, ultra-thin copper-clad laminates and dielectric prepreg materials used to fabricate high layer count PTH, Buildup and UHDI multilayer printed circuit boards (PCBs), announced the introduction of the CeleritasSF and CeleritasBU series of laminates and prepregs, which enable PCIe Gen 6 & 7 and data rates of 224 Gb/s per channel.