Flexible Thinking: The Key to a Successful Flex Circuit Design Transfer
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
HaiLa Technologies Releases Extreme Low-Power Development Platform for Wi-Fi Communications
January 6, 2025 | BUSINESS WIREEstimated reading time: 1 minute
HaiLa Technologies, a supplier of advanced low power wireless semiconductor solutions, introduced a new development platform to better support developers and researchers in creating extremely low power connected solutions.
The HaiLa EVAL2000 development board features the HaiLa BSC2000 Passive Backscatter on Wi-Fi chip combined with ST Microelectronics’ ultra-low power MCU, the STM32U0.
Leveraging off-the-shelf Wi-Fi infrastructure, HaiLa’s BSC2000 allows system architects to easily create extremely low-power designs with connectivity to any sensor. The EVAL2000 offers GPIO, I2C and SPI sensor interfaces. Sensor integration is done in firmware on the MCU. The EVAL2000 will be shown at CES with the ST Microelectronics ISM330ISN Motion Sensor.
"The EVAL2000 development kit enables rapid prototyping for a wide range of connected sensor applications over Wi-Fi,” stated Patricia Bower, VP Product Management at HaiLa. “The kit leverages ST Microelectronics’ lowest-power processor, allowing developers to showcase IoT device data communication with unprecedented, extremely low power consumption.”
As demand soars for connected devices, the need to address their environmental impact is critical. The largest contributor to power consumption in battery-powered Wi-Fi devices is typically the radio. HaiLa’s achievements in aggressively reducing radio power will help tackle the growing challenge of battery waste attributed to IoT devices.
Passive backscatter over Wi-Fi paves the way to reducing power for connected devices to near zero-energy. HaiLa’s backscatter adaptation uses a fraction of the power of typical Wi-Fi radio architectures, enabling both smaller batteries, a single battery over product life, or no battery at all by leveraging harvested energy.
The EVAL2000 reference design is also offered as a power- and size-optimized EVAL3000, which allows the system to operate battery-free, relying on harvested ambient light energy. The EVAL3000 sensor tag design consumes 60µW at a 5 second sensor polling interval.
Share on:
Suggested Items
BrainChip Partners with RTX’s Raytheon for AFRL Radar Contract
04/03/2025 | BUSINESS WIREBrainChip Holdings Ltd, the world’s first commercial producer of ultra-low power, fully digital, event-based, neuromorphic AI, today announced that it is partnering with Raytheon Company, an RTX business, to service a contract for $1.8M from the Air Force Research Laboratory on neuromorphic radar signaling.
STMicroelectronics, Innoscience Sign GaN Technology Development and Manufacturing Agreement
04/02/2025 | STMicroelectronicsSTMicroelectronics, a global semiconductor leader serving customers across the spectrum of electronics applications, and Innoscience, the world leader in 8” GaN-on-Si (gallium nitride on silicon) high-performance low-cost manufacturing, announce the signature of an agreement on GaN technology development and manufacturing, leveraging the strengths of each company to enhance GaN power solutions and supply chain resilience.
TRI Test Solutions at INNOELECTRO 2025
04/02/2025 | TRIAnytest will join INNOELECTRO 2025, held at BOK Sportcsarnok from April 8 – 10, 2025, to showcase TRI's Test Solution.
Mazda, ROHM Begin Joint Development of Automotive Components Using Next-Generation Semiconductors
03/28/2025 | ROHMMazda Motor Corporation and ROHM Co., Ltd. have commenced joint development of automotive components using gallium nitride (GaN) power semiconductors, which are expected to be the next-generation semiconductors.
Electronics in Harsh Environments Conference Program Announced
03/25/2025 | SMTASMTA Europe is proud to announce the 2025 Electronics in Harsh Environments Conference, taking place 20-22 May in Amsterdam, Netherlands. This global conference is a three-day technical event with 27 technical presentations focused on building reliable electronics used in power electronics and harsh environments.