The Marketing Minute: A Brand Visibility Playbook—Get Seen, Heard, and Remembered
American Made Advocacy: Supporting the Entire PCB Ecosystem—Materials to OEMs
Marcy's Musings: The Hole Truth—Via Integrity in an HDI World
Effects of Advanced Packaging and Stackup Design
December 26, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Kris Moyer teaches several PCB design classes for IPC and Sacramento State, including advanced PCB design. His advanced design classes take on some really interesting topics, including the impact of a designer’s choice of advanced packaging upon the design of the layer stackup.
Kris shares his thoughts on the relationship between packaging and stackup, what PCB designers need to know, and why he believes, “The rules we used to live by are no longer valid.”
Kris, tell us how advanced packaging can impact stackup design. What challenges do designers need to be aware of?
Kris Moyer: With advanced packaging you usually need to use HDI or UHDI technology. This usually means sequential lamination. With sequential lamination you need to select materials that can survive multiple lamination thermal cycles.
When we were discussing advanced packaging and stackup design recently, you said, “The rules we used to live by are no longer valid.” Expand on that a little bit.
As I mentioned, your selection of materials is now further restricted by the need for materials that survive multiple lamination cycles. Additionally, since we are adding layers one at a time and need plating on all layers, not just the outer layers, the copper design is now more difficult. Also, since we are adding layers one at a time, we can now have some select instances of unbalanced Z-axis and still meet bow and twist. Furthermore, many of the ultra-thin dielectric layers used in HDI/UHDI are just resin-coated copper without any reinforcement, so CTE/FA can be more of an issue.
To read this entire conversation, which appeared in the December 2024 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?
Beyond Design: The Metamorphosis of the PCB Router
06/18/2025 | Barry Olney -- Column: Beyond DesignThe traditional PCB design process is often time-consuming and labor-intensive. Routing a complex PCB layout can consume up to 30% of a designer’s time, and addressing this issue is not straightforward. We have all encountered this scenario: You spend hours setting the constraints and finally hit the Go button, only to be surprised by the lack of visual appeal and the obvious flaws in the result.
Robust AI Demand Drives 6% QoQ Growth in Revenue for Top 10 Global IC Design Companies in 1Q25
06/15/2025 | TrendForceTrendForce’s latest investigations reveal that 1Q25 revenue for the global IC design industry reached US$77.4 billion, marking a 6% QoQ increase and setting a new record high. This growth was fueled by early stocking ahead of new U.S. tariffs on electronics and the ongoing construction of AI data centers around the world, which sustained strong chip demand despite the traditional off-season.
Cadence Advances Design and Engineering for Europe’s Manufacturers on NVIDIA Industrial AI Cloud
06/13/2025 | Cadence Design Systems, Inc.At NVIDIA GTC Paris, Cadence announced it is providing optimized solutions for the world’s first industrial AI cloud in collaboration with NVIDIA.
Zuken Autorouters Embrace Collaborative AI
06/12/2025 | Andy Shaughnessy, Design007 MagazineMaybe you’ve never liked autorouters; if so, you’re not alone. As Andy Buja, Zuken’s technical account manager for PCB Solutions, admits, autorouters are not perfect. But today’s autorouters allow designers a greater level of control than ever before, especially routers that incorporate collaborative AI.