-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueSales: From Pitch to PO
From the first cold call to finally receiving that first purchase order, the July PCB007 Magazine breaks down some critical parts of the sales stack. To up your sales game, read on!
The Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Keysight Unveils 3kV High Voltage Wafer Test System for Power Semiconductors
October 10, 2024 | BUSINESS WIREEstimated reading time: 1 minute

Keysight Technologies, Inc. introduces a 4881HV High Voltage Wafer Test System expanding its semiconductor test portfolio. The solution improves the productivity of power semiconductor manufacturers by enabling parametric tests up to 3kV supporting high and low-voltage in one-pass test.
Manufacturers have traditionally measured wafers using separate testers for high and low voltages. However, demand for power semiconductors is rapidly growing due to their multifunctionality, higher performance, and next-generation devices such as silicon carbide (SiC) and gallium nitride (GaN). As a result, customers need a solution to more accurately and efficiently test their devices and reduce time to market.
Keysight’s solution addresses these challenges by allowing power device makers to perform process control monitoring (PCM) and wafer acceptance testing (WAT) in manufacturing. The new test system delivers the following benefits:
High-Voltage Capability to Meet Future Needs: The high-voltage switching matrix (HV-SWM) supports up to 3kV requirements, is scalable up to 29 pins, and integrates with precision source measure units (SMUs). It enables highly flexible measurements from low current down to sub-pA resolution up to 3kV at any pins. Additionally, high-voltage capacitance measurement and various parametric tests are supported.
One-pass Testing Increases Productivity and Efficiency: The HV-SWM enables a single test system instead of separate high-voltage and low-voltage test systems. Utilizing one system is more efficient and reduces the required footprint and testing time. The system integrates with factory automation environments using Keysight’s SPECS-FA software, which improves the efficiency of the entire production process.
Enhanced Safety and Reliability: The test system has built-in protection circuitry and machine control, ensuring operators and equipment are not impacted by high-voltage surges during a test, and is compliant with safety regulations, including SEMI S2 standards.
Shinji Terasawa, Vice President and General Manager of Keysight's Wafer Test Solutions, said: “Keysight is thrilled to introduce our new wafer test system for power semiconductors, building on our long tenure of testing advanced semiconductors. Our mission is to lead the market by providing cutting-edge solutions that anticipate and meet the rapidly evolving needs of the semiconductor sector. This latest innovation exemplifies our unwavering commitment to the industry.”
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
InTest Receives $2.6 Million Defense Industry Order
08/06/2025 | BUSINESS WIREInTest Corporation, a global supplier of innovative test and process technology solutions for use in manufacturing and testing in key target markets which include semiconductor (semi), automotive/EV, defense/aerospace, industrial, life sciences, and safety/security, announced that it was awarded a $2.6 million order by a prime defense contractor.
Circuit Check Acquires Solution Sources Programming (SSP) to Become a Full-Service Test and Programming Provider with Expanded Presence in Silicon Valley
08/05/2025 | PR NewswireCircuit Check, a global leader in turnkey functional test systems across medical, automotive, industrial, military/aerospace, and emerging AI applications, today announced the acquisition of Solution Sources Programming (SSP), a trusted Silicon Valley provider of integrated test and programming solutions for over 35 years.
Register Now for the HATS²™ Technical Day at GEN3 HQ
08/05/2025 | GEN3GEN3 a world-leading manufacturer of testing, measurement and production solutions for electronics reliability. Headquartered in Farnborough, UK, GEN3 is announcing the final call for registrations to attend the exclusive HATS²™ Technical Day — a hands-on, live demonstration event showcasing the Highly Accelerated Thermal Shock Tester (HATS²™), the groundbreaking innovation from industry pioneer Bob Neves.
Atg Launches Latest Large Format Test System, A9XL, with 8 Heads and 48” x 26” Panel Capability
08/04/2025 | atg Luther & Maelzer GmbHatg Luther & Maelzer GmbH (a Mycronic company) is proud to roll out a new large format test system generation based on the latest high speed atg A9 (board size up to 24” x 21”) and A9L platform.
Magnalytix’s Dr. Mike Bixenman to Guide PDC at SMTA High-Reliability Cleaning and Conformal Coating Conference
07/31/2025 | MAGNALYTIXMagnalytix, providing real-time reliability solutions for electronics manufacturing, is excited to announce that Dr. Mike Bixenman will present the professional development course “The Effects of Flux Residues and Process Contamination on the Reliability of the Electronic Assembly” on Wednesday, Aug. 13 at 9:00 AM CST to open the second day of the STMA High-Reliability Cleaning and Conformal Coating Conference.