Flexible Thinking: The Key to a Successful Flex Circuit Design Transfer
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
ULT Introduce New Extraction Solution for Combustible and Carcinogenic Laser Dusts
August 6, 2024 | ULT AGEstimated reading time: 1 minute
ULT is introducing the LAS 260 H/Ex, a new solution for removing critical dust during various laser processes. The explosion-proof device was developed for extracting and filtering dry, combustible, and health-endangering pollutants (dust and fumes) that can arise during laser processing of plastics and metals.
As an ATEX-compliant system designed to be free of ignition sources, the LAS 260 H/Ex is suitable for installation and operation within a zone 22 and enables the safe separation of combustible dust. Even the finest particles are separated to 99.995% in a two-stage filter system including a HEPA H-14 filter and safety filter stage.
The safety filter with integrated activated carbon filling ensures the safe operation of the device and removes gases that are hazardous to health and unpleasant odors. Due to the high level of cleaning, the filtered clean gas can be fed back into the work area even when carcinogenic, mutagenic, or toxic dust is separated (recirculation mode).
In addition to the redundant filter system, the LAS 260 H/Ex provides further user benefits such as high flexibility through mobile utilization, extremely quiet operation, and low energy consumption.
All electrical components are suitable for UL and CE compliant use. In addition, the device can be used worldwide with a voltage range of 110-240 V.
To ensure compliance with the minimum volume flow of >20 m/s, an automatic monitoring system is integrated, which issues a warning signal if the flow falls below this limit.
A collection element (hose, pipe, extraction arm) with DN50 can be connected to the extraction and filter system. In addition, an M12 i
Share on:
Suggested Items
TRI Test Solutions at INNOELECTRO 2025
04/02/2025 | TRIAnytest will join INNOELECTRO 2025, held at BOK Sportcsarnok from April 8 – 10, 2025, to showcase TRI's Test Solution.
IPC APEX EXPO 2025 Review: Shifting My Focus to the Show Floor
04/02/2025 | John Watson, CIDIPC APEX EXPO 2025 marked a significant milestone as it celebrated its 25th anniversary. (Personally, I don’t think it looked a day over 20.) If you didn’t attend this great event, why not? This was my 10th anniversary of attending, and it had a distinctly different feel. There was a celebratory atmosphere as both veterans, like myself, and first-time attendees, were drawn into a celebratory occasion marking the significant milestone of the 25th anniversary.
European Chips Skills Academy Launches ECS Summer School 2025 to Inspire Future Electronics Talent
04/01/2025 | JCN NewswireThe European Chips Skills Academy (ECSA), an EU-funded project coordinated by SEMI Europe, in collaboration with industry partners AENEAS, EPoSS, and INSIDE, has announced the launch of the ECS Summer School 2025.
Real Time with... IPC APEX EXPO 2025: Highlighting Global PCB Trends and Technologies with all4-PCB
04/01/2025 | Real Time with...IPC APEX EXPOAndy Shaughnessy and all4-PCB's Ralph Jacobo discuss global distribution trends in the PCB industry, focusing on new technologies in plasma etching and final inspection. Ralph highlights the importance of IC substrate buildup technology and partnerships in the market.
Do You Have X-ray Vision? SMT007 Magazine April Issue Is No Joke
04/01/2025 | I-Connect007 Editorial TeamAs component packaging continues to evolve, the capability of inspecting through components is crucial. Has X-ray’s time finally come in electronics manufacturing? Join us in this issue of SMT007 Magazine, where we answer this question—and others—to bring more efficiency to your bottom line.