iNEMI LTS Tech Topic Series: Electromigration in Tin-Bismuth Planar Solder Joints
October 10, 2023 | iNEMIEstimated reading time: 1 minute
iNEMI is launching a series of webinars focused on low temperature solder (LTS). This first webinar in the series will share information from Phase 1 of iNEMI’s Electromigration in SnBi Solder for Second-Level Interconnect project, which is determining the effects of joint height, temperature, current density and PCB finishes on reliability over a product’s life.
The low melting temperature (138°C) of SnBi alloys make it attractive for assembling high-density microelectronic packaging, which is prone to warpage. However, bismuth (Bi) has a high propensity for electromigration and segregation at the anode under high current density conditions, leading to potentially brittle solder joints with high electrical resistance with time in field.
The Phase 1 project team used a planar geometry solder joint test vehicle to study electromigration in low temperature solders such as SnBi. The novelty of their approach is that the planar solder joints bridging copper traces on printed circuit boards allow the metallurgical and electromigration phenomena to be directly and non-destructively observed while monitoring the resistance changes in the solder joints. This webinar will share the team’s observations and analysis of experiment results plus talk about next steps.
Registration
This webinar is open to industry; advance registration is required. Two sessions are scheduled (with the same content).
Session 1
Tuesday, October 17, 2023
10:00-11:00 a.m. EDT (Americas)
4:00-5:00 p.m. CEST (Europe)
10:00-11:00 p.m. CST (China)
Session 2
Wednesday, October 18, 2023
9:00-10:00 a.m. CST (China)
9:00-10:00 p.m. EDT (Americas) on October 17
Suggested Items
WSTS Semiconductor Market Forecast Spring 2024
11/26/2024 | WSTSWSTS has adjusted its Spring 2024 forecast upwards, projecting a 16.0 percent growth in the global semiconductor market compared to the previous year.
IPC Japan Puts More Focus on Collaboration, Standards Development, Advanced Packaging
11/26/2024 | Yusaku Kono, IPC Japan RepresentativeIn the past year, IPC has strengthened its relationships with key Japanese companies and government bodies. This was accomplished, in part, by a visit to Japan this past summer, where members of the IPC Asia team, punctuated by standards committee work last winter, forged stronger ties with government officials and companies involved in electronics manufacturing.
Global Notebook Shipments Expected to Grow by 4.9% in 2025, Business Demand Emerges as a Key Driver
11/25/2024 | TrendForceTrendForce reports that the global notebook market in 2024 is projected to recover at a moderate pace, hindered by high interest rates and geopolitical uncertainties.
Real Time with... electronica 2024: SPEA's AI Integration—Innovations in Test Equipment
11/25/2024 | Real Time with... electronicaIn this interview from electronica 2024, Pete Starkey speaks with Andrea Furnari, VP of Electronic Test Products Business Unit for SPEA. The discussion revolves around AI integration in test equipment, trends in substrate materials, and SPEA's focus on R&D.
China Overtakes Germany and Japan in Robot Density
11/22/2024 | IFRChina's adoption of robots continues at a rapid pace: The country has surpassed Germany and Japan in the ratio of robots to factory workers, taking third place in the world in 2023.