Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
It’s Only Common Sense: Selling During an Economic Downturn
Marcy’s Musings: Can You Hear the Voices?
GreenSource Engineering: An Eye on Design
October 4, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 1 minute
Schweitzer engaged the services of GreenSource Engineering to assist in the initial design of the facility, along with handling automation equipment. Nolan Johnson met with the GreenSource team— Michael Gleason, Marco Mirkovic, James Brown, and Rick Nichols—representing GreenSource Engineering and GreenSource Fabrication (GSF), to better understand their working relationship for the build-out of the new facility in Moscow, Idaho.
Nolan Johnson: Your organization was involved with Schweitzer’s greenfield facility in Moscow, Idaho. What was your role there?
Rick Nichols: Essentially, we placed a high degree of automation in their facility. Once the word went out that we had successfully built a plant in New Hampshire, primarily fielding our own equipment along with the zero liquid discharge (ZLD) unit—which is a key component to any greenfield site—we got involved with SEL fairly rapidly. SEL came to the fab in New Hampshire to receive base level training on all aspects; they were given full access to the shop, and our engineers helped them out.
SEL collaborated with GreenSource on the factory design and equipment selection to ensure that the GSF automation equipment and ZLD system worked well. Once SEL saw the setup in New Hampshire, they wanted a similar structure for their master plan. We designed horizontal equipment for them although we did not install this equipment. We installed the ZLD unit, a prime piece of technological advancement that greenfield sites will be interested in.
Johnson: Rick, did SEL install custom-built equipment?
Nichols: Everything we build is custom, to some extent. I can give you an example. A typical stripping line in most board shops utilizes an alkaline solution of one kind or other, especially now. Often, shops use just sodium hydroxide, and this will tend to oxidize the panel’s copper surface. Our stripper, for example, has a built-in post-clean to ensure that the panels that come out are directly readable by AOI.
To read this entire conversation, which appeared in the September 2023 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Amtech Boosts Capabilities with New SMT Lines and Advanced Batch Washing System
04/25/2025 | AmtechAmtech Electrocircuits, a leading provider of manufacturing solutions, has announced a major upgrade to its production capabilities with the installation of multiple new SMT (Surface Mount Technology) lines and a state-of-the-art batch washing system.
LITEON, Elephantech Deepen Partnership to Further Drive Innovation and End-to-End Sustainability
04/24/2025 | LITEON TechnologyLITEON Technology has signed a second Memorandum of Understanding (MoU) with Elephantech, deepening their strategic partnership in advancing green Printed Circuit Boards (PCB) manufacturing. Announced on Earth Day (April 22), the renewed collaboration highlights their joint commitment to achieving net-zero carbon emissions.
Improve Your Process Reliability: Axxon-Mycronic and HumiSeal to Host Conformal Coating Workshop in Guadalajara
04/15/2025 | Axxon-MycronicAxxon-Mycronic, a leading, global supplier of innovative and production-ready, dispensing and conformal coating systems, in collaboration with HumiSeal, a global expert in protective coating materials, is excited to announce a Conformal Coating Workshop taking place on May 8, 2025 in Guadalajara, Mexico.
GEN3 Opens State-of-the-Art Technical Centre for Customers and Industry Professionals
04/14/2025 | Gen3GEN3 is proud to announce the opening of the A.W Technical Centre. Named in honor of Arthur William Naisbitt—affectionately known as AW—the founder of Concoat (now GEN3) in 1969, the company has since spanned three generations. Today, AW's legacy continues with his son, Graham, and now Grandson, Andrew, at the helm of GEN3.
Global Semiconductor Equipment Billings Surged to $117 Billion in 2024
04/10/2025 | SEMIWorldwide sales of semiconductor manufacturing equipment increased 10% to $117.1 billion in 2024 from $106.3 billion in 2023, SEMI, the industry association representing the global electronics design and manufacturing supply chain.