It’s Only Common Sense: Selling Without Selling
Dan’s Biz Bookshelf: ‘The Art of Going SLOW’
Happy’s Tech Talk #39: PCBs Replace Motor Windings
Boeing Receives U.S. Air Force E-7 Airborne Early Warning & Control Aircraft Contract
March 2, 2023 | BoeingEstimated reading time: 1 minute
Boeing will begin development of two new U.S. variants of the E-7 Airborne Early Warning & Control (AEW&C) aircraft through a $1.2 billion Undefinitized Contract Action.
The E-7 provides a fully integrated, combat-proven, flexible command and control node that delivers multi-domain awareness in the most challenging operational environments. The E-7’s open systems architecture and agile software design enable the aircraft's capabilities to evolve and remain ahead of future threats.
“The E-7 is a proven platform,” said Stu Voboril, E-7 program vice president and general manager. “It is the only advanced aircraft that is capable of meeting the U.S. Air Force’s near-term Airborne Early Warning & Control requirement while enabling integration across the joint force.”
The E-7 tracks multiple airborne and maritime threats simultaneously with 360-degree coverage via the Multi-role Electronically Scanned Array (MESA) sensor. MESA provides the warfighter with critical domain awareness to detect and identify adversarial targets at long range and dynamically adjusts to emerging tactical situations.
Other E-7 operators include the Royal Australian Air Force, Republic of Korea Air Force, Turkish Air Force and the United Kingdom’s Royal Air Force.
The E-7 uses a well-established supply chain which significantly reduces maintenance and logistics costs and increases mission readiness on day one. Converted from the Next-Generation 737-700, the E-7 capitalizes on existing commercial derivative aircraft design, certification and modification processes, allowing E-7s to be fielded to meet Air Force needs.
Share on:
Suggested Items
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
Kitron Wins Additional €7 Million Contract, Expanding Presence in Industrial Automation
06/06/2025 | KitronKitron has signed a significant manufacturing agreement with a leading customer in the industrial automation sector. The agreement covers electronics manufacturing services for a new generation of high-performance drive modules used in automation and motion control systems.
Connect the Dots: Proactive Controlled Impedance
05/29/2025 | Matt Stevenson -- Column: Connect the DotsFrom data centers to smartphones, designers know that the ohms have it. Getting impedance right ensures all-important signal integrity and delivers high-performing boards. Our designers understand the importance of controlled impedance, but not everyone addresses it in their designs. The most common and important controlled impedance types we see include microstrip, stripline, embedded microstrip, and differential pairs.
Trouble in Your Tank: Yield Improvement and Reliability
05/22/2025 | Michael Carano -- Column: Trouble in Your TankThere’s a simple rule of business in manufacturing: “It is all about yields.” Higher yields for your products allow for increased profits and satisfied customers. When there are lower yields, overall cost to manufacture increases, and the additional time and strain on the factory floor affect the entire operation. Lower yields are often the result of “process drift,” when critical process parameters and specialized plating additives fall outside their acceptable ranges.
Keysight Quantum Control System Embedded within Fujitsu and RIKEN’s World-Leading 256-Qubit Quantum Computer
05/16/2025 | BUSINESS WIREKeysight Technologies, Inc. announced that its Quantum Control System (QCS) has been selected as the control system embedded within Fujitsu and RIKEN’s recently developed 256-qubit quantum computer at the RIKEN RQC-FUJITSU Collaboration Center in Japan, marking a pioneering step in the industry’s pursuit of fault tolerant quantum computer.