Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
Gardien Group Offers Inductance and 4-Wire Kelvin Testing
December 15, 2021 | Gardien GroupEstimated reading time: 1 minute
Along with 4-Wire Kelvin, available on the G Series Flying Probes, Gardien now offers Inductance Testing/Henry measurement for applications like Coils, Transformers, Heater Circuits and Embedded Coils on their Flying Probe Testers (FPT).
Although standard Electrical Test will provide capture of an open circuit on a primary or secondary of an embedded coil, it cannot determine if the winding has shorted to itself. Using theories behind 4-Wire Kelvin, which is applied in high resolution measurements, Gardien can now perform accurate inductance measurements of coils, heater traces and other hybrid circuits where inductance measurements are critical.
Rick Meraw, Group VP Quality/ R&D stated, “Building on the technology of 4-Wire Kelvin has given the opportunity to provide Inductance Testing. This is primarily effective due to the use of 4-Wire Kelvin method to provide the accurate measurement. Parasitic stray variables are filtered out using the 4-Wires (2 on each measurement probe) which allows for the native Inductive measurement to be captured.”
Rick went on to say, “4-Wire Kelvin Testing has been available for years, but to have the ability to perform both tests on a single machine using our FPX Software platform allows greater options at our Service Centers for our customers and partners to choose from. It is a positive addition to our portfolio for Services and Equipment purchases alike.”
Gardien has constantly upgraded and added new technologies and most advanced features to its new and existing machines during its long journey in the field. Consistent R&D and the ability to adapt to drastic changes have made Gardien one of the most dynamic names in the PCB industry.
Contact your nearest Service Centre for further details or visit www.gardien.com
About Gardien
Gardien is the world’s largest provider of independent testing and inspection solutions to the PCB industry. With a global footprint in 6 countries & 18 service centers across Asia, Europe and North America, Gardien partners with PCB manufacturers supplying into the automotive, aerospace, medical, defense, computers & telecommunications sectors. We cater to the testing and QA needs of the entire spectrum of fabricators from small family-owned PCB shops to large international corporations.
Share on:
Suggested Items
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.