Point-of-Care Sensors to Detect Manganese from Single Drop of Blood
September 19, 2018 | UICEstimated reading time: 3 minutes

A three-year, $1.8 million grant from the National Institutes of Health will enable researchers at the University of Illinois at Chicago to develop portable, easy-to-use sensors that can detect toxic metals in a single drop of blood. The sensors would allow for faster and cheaper research, as well as rapid detection of metals including manganese and lead, both of which are powerful neurotoxins that can affect cognitive development and neuromotor function.
“Being able to quickly detect metals like lead and manganese would mean that remediation efforts to remove the metals from the environment can begin faster and treatment of the individual can also start faster,” said Ian Papautsky, the Richard and Loan Hill Professor of Bioengineering in the UIC College of Engineering and a principal investigator on the grant. “The sensors could also be used to test for these metals in water.”
Currently, small point-of-care sensors exist to detect lead in blood and water, but no such sensor exists to detect manganese. Manganese is an essential element needed by the body for basic cellular functions, but at higher levels, it is a potent neurotoxin that can accumulate in the brain and cause impairment. Current methods to detect this metal are expensive and time-consuming, involving either processing toenail clippings or hair, or taking blood draws in excess of 5 milliliters. Lead is another powerful neurotoxin that can cause lifelong deficits in IQ and academic achievement. Both metals are often discharged to the environment by industrial activities or manufacturing plants, while manganese is also a naturally occurring trace metal commonly found in the environment.
“Because these metals are most harmful to developing children, another issue, especially if you want to monitor exposure over time, is taking these relatively large —for a kid — amounts of blood over and over again to track manganese levels,” said Papautsky. “Getting a single drop of blood from a child is a lot easier.”
For researchers studying manganese in populations, they may only collect a few samples a day and wait until they have enough material to send to the lab for processing.
“This means research is often slow, with results coming in months after samples are collected. Our sensors could help speed research so that scientists can get answers faster,” Papautsky said.
Papautsky and his colleagues will work to develop and integrate several parts needed for the sensors: the chip on which a drop of blood or water is placed, the equipment that sends current through the chip to separate out the metal, the software to process the results, and the user interface that displays the results.
“We want the sensor to be easy for anyone to use, and the results easy to interpret,” Papautsky said.
Next, the team will validate their sensor by comparing results of blood tests from 150 children recruited from Chicago neighborhoods known to be affected by environmental manganese with results obtained from matching blood samples sent to a traditional lab for processing.
They will also investigate whether free manganese — manganese ions that aren’t bound to proteins — can provide useful information on total blood levels of manganese.
“Free manganese is much easier to measure than total manganese levels with our sensors, so if free manganese readings turn out to be accurate indicators of the total levels, we will further optimize the sensors to focus on free manganese,” Papautsky said.
Ultimately, Papautsky thinks his sensors will cost around $10 each, not including the hardware and software, which need to be purchased just once.
Other investigators on the grant are Erin Haynes, professor of environmental health, and William Heineman, Distinguished Research Professor, department of chemistry at the University of Cincinnati.
Suggested Items
Laird Thermal Systems Announces Max Kley as New CEO
04/18/2025 | Laird Thermal SystemsLaird Thermal Systems (LTS) is pleased to announce the appointment of Dr. Max Kley as its new Chief Executive Officer, effective April 1, 2025. Max Kley brings a wealth of international leadership experience to LTS, having successfully led and developed businesses across the USA, Europe, and Asia.
AdvancedPCB Appoints Gary Stoffer as Chief Commercial Officer
04/18/2025 | PRNewswireAdvancedPCB is proud to announce the appointment of Gary Stoffer as its new Chief Commercial Officer (CCO). In this role, Stoffer will lead all sales, marketing, and commercial strategy initiatives as the company continues its mission to deliver cutting-edge PCB solutions to industries worldwide.
Industry Voices Highlighted in the April 2025 Issue of PCB007 Magazine
04/15/2025 | I-Connect007 Editorial TeamWe take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue of PCB007 Magazine. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
Marcy’s Musings: Can You Hear the Voices?
04/16/2025 | Marcy LaRont -- Column: Marcy's MusingsTariffs, CapEx spending, the war in Ukraine, and domestic and global economies: I wanted to know what’s on your minds as we launch headlong into Q2 2025. So, this month, I’m highlighting industry voices and how they feel about their businesses, the effects of a new U.S. administration, and where technology is heading.
Nano Dimension Appoints Ofir Baharav as CEO
04/08/2025 | Nano DimensionNano Dimension Ltd., a digital manufacturing leader, announced the appointment of Mr. Ofir Baharav as its new Chief Executive Officer, effective immediately.