-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueSales: From Pitch to PO
From the first cold call to finally receiving that first purchase order, the July PCB007 Magazine breaks down some critical parts of the sales stack. To up your sales game, read on!
The Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Mini LED Bound to Face Direct Competition from OLED
May 8, 2018 | TrendForceEstimated reading time: 2 minutes
According to TrendForce (WitsView)’s latest report New Display Technology Cost Analysis, some manufacturers have focused on the development of Mini LED, expecting it to become a transitional product before Micro LED is ready for mass production. The architecture of Mini LED is similar to that of current LED backlight in LCD displays, so no major change in the design is needed. However, Mini LED is bound to face the direct competition from OLED in the sector of consumer electronics such as smartphones and TV. For the short term, large-size TV and high-end IT products will be the segments where Mini LED has the chance to compete with OLED.
Comparable to OLED in color saturation and cost
In TV market, OLED color patterning technique is not mature yet, while the material utilization rate of current evaporation process is only 20 to 30%. In fact, if evaporation is used to make full-color TV, the problems will be low yield rate and material utilization rate. Therefore, WOLED is the main technique used currently, which consists of yellow/green and blue light-emitting units to emit white light, then color filters are used to present full color. This architecture still has advantages in contrast and thickness, however, Mini LED with QD film backlight may achieve the same level of color saturation as WOLED does.
Taking 65-inch UHD OLED TV panel as an example, the production cost is probably between 950 and 1,000 US dollars. As for a 65-inch UHD with Mini LED backlight, which uses 30,000 to 40,000 LEDs, the production cost is between 900 to 1,000 US dollars. Since power consumption is not a priority issue for television, and the cost of Mini LED is actually similar with that of OLED, Mini LED does have an opportunity in the market. Recently, first-tier makers such as Samsung Electronics and LGE have demonstrated related products or announced that they plan to launch large-size Mini LED TVs and commercial display.
Mini LED may target at high-end IT products if costs are not a priority for vendors
WitsView notes that, when the costs are not a priority for vendors, Mini LED has higher chance to be adopted. Current devices using Mini LED include the 10.1-inch automotive display released by Innolux at the CES 2018, the 27-inch LCD gaming monitor, 15.6-inch notebook and 2-inch VR devices launched by AUO recently, etc. It can be seen that the Mini LED technology has more opportunities in niche markets, where the prices for products are high.
Inevitably, IT products are used for word processing from time to time, so the problem of burn-in caused by long-lasting static images remains an issue for OLED. In 2016, adoption in smartphone is priority for Samsung's OLED panel production capacity, which makes Samsung lose the opportunity to enter IT market. In recent years, with the increasing size and revenue of gaming market, IT product vendors are eager to launch gaming products with high-margin and high added value. In addition, HDR standards have been applied to PC monitors recently, and local dimming of Mini LED has fully demonstrated HDR. Therefore, high-end IT products will be one of the several segments where Mini LED has the chance to compete with OLED from the same starting point.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
From Attraction to Action: Where Marketing Ends and Sales Begins
07/29/2025 | Brittany Martin, I-Connect007Before a PO hits the system, marketing has already done a lot of heavy lifting. Without strategic marketing, the PO might never arrive. At I-Connect007, we have been fortunate to help many companies achieve sales success through marketing. The key to success? Understanding how marketing leads to sales.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
07/25/2025 | Marcy LaRont, I-Connect007In industry news this past week, I’m putting a focus on sustainability in electronics by highlighting my interview with Kelly Scanlon and Corey Dehmey, and Nolan Johnson’s Meet the Author podcast with Beth Turner of MacDermid Alpha Electronics Solutions. I also chose to spotlight the M&A activity and outlook in the U.S. market and regional market news in India and Mexico.
Accelerated Brand Expansion Reshapes Foldable Phone Market; Apple’s 2026 Entry May Ignite Industry Breakthrough
07/22/2025 | TrendForceTrendForce’s latest forecast estimates that shipments of foldable phones will reach 19.8 million units in 2025, maintaining a market penetration rate of around 1.6%, on par with 2024.
Punching Out: M&A North American PCB and EMS Deals for the First Half of 2025
07/23/2025 | Tom Kastner -- Column: Punching Out!As we entered 2025, the M&A deal world was prepared for a busy year in electronics, plus sentiment for the overall M&A market was bullish. We had “a deal guy” entering the White House, and he’d pledged to support U.S. manufacturing. All signals were green. However, to date, M&A deals this year are around the same as in the first half of 2024.
ViTrox’s HITS 5.0 Empowers Global Partners with Innovative Solutions and Stronger Bonds
07/16/2025 | ViTroxViTrox, strives to be the World’s Most Trusted Technology Company, proudly announces the successful conclusion of its fifth edition of High Impact Training for Sales (HITS 5.0), held from 23rd to 27th June 2025 at ViTrox Campus 2.0 and 3.0, located in Batu Kawan Industrial Park, Penang, Malaysia.