It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
PhiChem Open House a Success!
March 28, 2016 | Pete Starkey, I-Connect007Estimated reading time: 5 minutes
Delighted to be invited to an exclusive preview of the new PhiChem global headquarters and R&D centre in Shanghai’s Baoshan suburb, I joined the VIP group assembled at the PhiChem booth at the CPCA show, made welcome by PhiChem President Dr. Jin Zhang.
An hour’s private bus ride brought us to an immaculately presented site—four brand-new buildings with a total of 500,000 square feet of floor area: administration, pilot plant manufacturing and packaging, warehousing, fronted by a spectacularly impressive six-story laboratory complex, which had taken five years from green-field site to completion.
Gleaming! Through reception and into a display area with glass showcases holding examples of PhiChem’s products and applications, and an appropriate place for Dr. Zhang to begin his explanation of PhiChem’s evolution since he founded the company in 2002.
A graduate chemist, with an MS degree in optics, and many years’ experience in microelectronics packaging and the development of optical and laser materials and components, Jin Zhang gained his doctorate in polymer chemistry at the University of Michigan in the U.S. Recognising the rapid growth in the demand for optical fibres for data and telecoms transmission, and a fundamental requirement for glass fibres to be coated for mechanical protection and enhancement of their optical properties, Dr. Zhang returned to China and began production of UV-curable coating resins in Shanghai. Since 2002, PhiChem has grown to become China’s largest supplier of UV-curable materials to the optical fibre industry and second largest in the world, producing all of its own raw materials and resin precursors.
Dr. Zhang reached into a display cabinet and took a short length of fibre from a large spool, explaining that the widespread use of high bandwidth optical fibre would not have been feasible without the protection afforded by UV-curable coatings. The sample he demonstrated had a coated diameter of 250 microns, the glass itself being half that diameter, and the combination of glass and coating had a tensile strength of five kilograms. Talking of high speed, he remarked that the fibre was coated and cured on-the-fly at 3000 metres per minute!
Page 1 of 3
Share on:
Suggested Items
Indium Technical Expert to Present at SiP Conference China
11/25/2024 | Indium CorporationIndium Corporation Senior Area Technical Manager for East China Leo Hu is scheduled to deliver a presentation on Low-Temperature Solder Material in Semiconductor Packaging Applications at SiP China Conference 2024 on November 27 in Suzhou, China.
Indium Corporation to Showcase Precision Gold Solder Solutions at MEDevice Silicon Valley 2024
11/18/2024 | Indium CorporationIndium Corporation® will feature its high-reliability AuLTRA® MediPro gold solder solutions at MEDevice Silicon Valley, taking place on November 20-21 in Silicon Valley, California. AuLTRA® MediPro is a family of high-performance, precision gold solder solutions for critical medical applications.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
11/14/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Silicon Valley Expo & Tech Forum taking place on December 5 at the Fremont Marriott Silicon Valley in Fremont, California.
Data-driven Precision in PCBA Manufacturing
11/13/2024 | Julie Cliche-Dubois, CogiscanThe intricacies involved in electronics manufacturing require more than just expensive equipment and skilled technicians; they necessitate an accurate understanding of the entire production flow, informed and driven by access and visibility to reliable data.
Rehm Thermal Systems Mexico Wins the Mexico Technology Award 2024 in the Category Convection Soldering
11/13/2024 | Rehm Thermal SystemsRehm Thermal Systems Mexico has won the Mexico Technology Award in the category convection soldering with the patented mechatronic curtain for convection soldering systems.