Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"

Rachael Temple - Alltemated

Suggested Items

Designing PCBs for Heat Staking: The Hole, the Head, and the Copper Around Them

11/18/2026 | Alex Spurgeon, U.S. Heatstake
An engineer once sent us a board that had passed every electrical test his team could throw at it: in-circuit test, functional test, and a week of burn-in. Six months into the field, units started coming back with cracked ceramic capacitors and one intermittently open BGA. The schematic and solder were fine. The failure analysis traced it to the assembly step that nobody had questioned: The board was being ultrasonically staked into its housing, and every unit had taken a dose of 20 kHz vibration inches from its most fragile components. High-frequency vibration has its place in assembling plastic components, but next to a ceramic capacitor, it may as well be a paint mixer.

Lattice Achieves On-Orbit Milestone in TESAT Optical Terminals

11/17/2026 | BUSINESS WIRE
Lattice Semiconductor, the low power programmable and platform firmware leader, announced that its low power, radiation-resilient Lattice Nexus™ FPGAs have surpassed one year of on-orbit operation in TESAT optical communication terminals.

Infineon Leads EU Project to Advance Compact Acoustic Sensor Technologies

11/17/2026 | Infineon
The European research project “Listen2Future” has been successfully completed after more than three years. Led by Infineon Technologies Austria, 27 partners from seven countries worked on a new generation of compact acoustic sensor and system technologies.

Electro-Matic Becomes First U.S. Reseller of Siemens Eigen Engineering Agent

11/17/2026 | Siemens
Siemens announced an agreement with longstanding distributor and automation technology supplier, Electro-Matic, to become the first US-based reseller of the Eigen Engineering Agent (EEA).

Taking Stock of the New Forced-Labor Tariffs

11/17/2026 | James Kim, Arentfox Schiff LLP
This month, I’m looking at the new Section 301 “forced labor” tariffs, which are having a sweeping effect on many key inputs into the electronics supply chain. I’ll review what the U.S. government is doing to enforce these new tariff measures, including tightening requirements for who can import goods into the country. If your operation imports a server, bare board, power supply, connector, cable assembly, or finished device, a single purchase order may now be subject to multiple tariff systems before it reaches your warehouse. The same product could be excluded from one tariff, exposed to another, or face detention over its supply chain.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in