Defense Speak Interpreted: If CHIPS Cuts Back, What Happens to Electronics Packaging Funds?
American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
How Good Design Enables Sustainable PCBs
August 21, 2025 | Gerry Partida, Summit InterconnectEstimated reading time: 1 minute
Sustainability has become a key focus for PCB companies seeking to reduce waste, conserve energy, and optimize resources. While many discussions on sustainability center around materials or energy-efficient processes, PCB design is an often overlooked factor that lies at the heart of manufacturing.
Good design practices, especially those based on established IPC standards, play a central role in enabling sustainable PCB production. By ensuring designs are manufacturable and reliable, engineers can significantly reduce the environmental impact of their products. Let’s explore how adhering to design rules can directly contribute to sustainability and why poor designs can derail these efforts.
The Hidden Cost of Bad Design
Poorly designed PCBs often result in low manufacturing yields, leading to higher scrap rates. For every lot that fails, manufacturers must remake boards, consuming additional materials, energy, and manpower. This cycle not only increases production costs but also amplifies the environmental footprint of each PCB produced.
For example, a design with inadequate annular rings or insufficient conductor or plane clearances may cause defects such as open circuits or shorts. Badly conceived or overly complex HDI stackups can lead to registration issues, delamination, and other non-compliances. These issues often require rework or remakes, both resource-intensive processes. The wasted copper, laminate, chemicals, and labor could have been avoided with a well-structured, IPC-compliant design.
Identifying Design Issues: Tools and Missed Opportunities
The industry has developed advanced tools to identify design issues early in the process, offering the potential to correct problems before manufacturing begins. PCB design tools like Siemens NPI (New Product Introduction) and fabrication tools like Genesis InSight or Integr8tor allow engineers to perform detailed design rule checks (DRCs) and manufacturability analyses. These tools highlight potential risks in the design, such as misaligned drill files, inadequate copper-to-edge clearances, and poorly optimized stackups.
To continue reading this article, which originally appeared in the August 2025 edition of Design007 Magazine, click here.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
I-Connect007 Launches New Podcast Series on Ultra High Density Interconnect (UHDI)
09/10/2025 | I-Connect007I-Connect007 is excited to announce the debut of its latest podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI). The series kicks off with Episode One, “Ultra HDI: What does it mean to people? Why would they want it?” Host Nolan Johnson is joined by guest expert John Johnson, Director of Quality and Advanced Technology at American Standard Circuits (ASC).
Global Citizenship: Together for a Perfect PCB Solution
09/10/2025 | Tom Yang -- Column: Global CitizenshipIf there’s one thing we’ve learned in the past few decades of electronics evolution, it’s that no region has a monopoly on excellence. Whether it’s materials science breakthroughs in Europe, manufacturing efficiencies in China, or design innovations in Silicon Valley, the PCB industry thrives on collaboration.
The Shaughnessy Report: Winning the Signal Integrity Battle
09/09/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportWhen I first started covering this industry in 1999, signal integrity was the hip new thing in PCB design. Conference classes on signal integrity were packed to the walls, and an SI article was guaranteed to get a lot of reads.
The Signal Integrity Issue: Design007 Magazine September 2025
09/09/2025 | I-Connect007 Editorial TeamAs the saying goes, “If you don’t have signal integrity problems now, you will eventually.” This month, our experts share a variety of design techniques that can help PCB designers and design engineers achieve signal integrity.
ASC Sunstone Circuits to Exhibit at AEMS 2025
09/09/2025 | American Standard CircuitsASC Sunstone Circuits will be exhibiting at AEMS 2025 (Anaheim Electronics and Manufacturing Show) to be held at the Anaheim Convention Center on September 24 and 25, 2025.